Abstract:High-entropy alloys (HEAs) are garnering widespread interest due to their exceptional hydrogen storage capabilities at ambient temperatures. Herein, a series of HEAs composed of V-Ti-Cr-Mn-Fe with varying Ti/Cr ratios has been synthesized via arc melting to serve as carrier materials for room-temperature hydrogen storage. Thanks to the composition of a large amount of body centered cubic (BCC) phase V32TixCr58-xMn5Fe5 exhibits excellent hydrogen storage performance, and the hydrogen absorption capacity of these HEAs escalates while the desorption capacity initially rises followed by a decline with an increase in the Ti/Cr ratio. Notably, the HEA with a Ti/Cr ratio of 1.0, namely V32Ti29Cr29Mn5Fe5, demonstrates exceptional performance by absorbing 3.55 wt% H2 within 60 min and rapidly releasing 2.16 wt% H2 within 5 min at 303 K. Further enhancement is achieved with the strategic doping of Ce in the V32Ti29Cr29Mn5Fe5, which leads to the removal of the Ti-rich phase and the incorporation of CeO2, significantly improves the activation performance, allowing the Ce-doped HEA to reach saturation in the 3rd hydrogen absorption cycle. Consequently, the hydrogen ab-/desorption capacities at ambient temperature are further augmented to 3.73 wt% and 2.26 wt%, respectively, and the enthalpies of hydrogen ab-/desorption are significantly reduced to -25.0 and 23.4 kJ/mol H2, marking a new benchmark for V-based HEAs. Dramatically, DFT calculations suggestes that the incorporation of Ce diminishes the structure energy of BCC phase structure for V32Ti29Cr29Mn5Fe4Ce1 as well as elongates the average distance of M-H from 1.955 & Aring; to 1.969 & Aring;, which corroborate the experimental results, offering profound insights into the underlying mechanisms of hydrogen storage within BCC-phase HEAs at ambient temperature.

Ti/Cr Regulated and Strategic Ce Doped V-Ti-Cr-Mn-Fe High-Entropy Alloys with Extraordinary Reversible Hydrogen Storage Properties at Ambient Temperature

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Effect of Rare Earth Doping on the Hydrogen Storage Performance of Ti1.02Cr1.1Mn0.3Fe0.6 Alloy for Hybrid Hydrogen Storage Application

Hydrogen storage in TiVCr(Fe,Co)(Zr,Ta) multi-phase high-entropy alloys

Development of AB 2 -type TiZrCrMnFeCoV intermetallic high-entropy alloy for reversible room-temperature hydrogen storage

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Evolution of the Phase and Hydrogen Storage Properties of New-Type VTiCrFeMn High-Entropy Alloy Prepared via Mechanical Alloying

Pushing the Boundaries of solid-state hydrogen storage: A Refined study on TiVNbCrMo high-entropy alloys

The Future of Hydrogen Economy: Role of High Entropy Alloys in Hydrogen Storage

Enhancement of vanadium addition on hydrogen storage properties of high entropy alloys TiZrFeMnCrV x

Effect of Cr/Mn Addition in TiVNb on Hydrogen Sorption Properties: Thermodynamics and Phase Transition Study

Superior cycle life of TiZrFeMnCrV high entropy alloy for hydrogen storage

Crystal structure and hydrogen storage properties of AB-type TiZrNbCrFeNi high-entropy alloy

High-entropy alloy TiV2ZrCrMnFeNi for hydrogen storage at room temperature with full reversibility and good activation

Improving the plateau performance of the TiZrFeMnCrV high-entropy alloy by partial substitution of V with fe, Mn and cr

Ce-Doped TiZrCrMn Alloys for Enhanced Hydrogen Storage

Mechanical Synthesis and Hydrogen Storage Characterization of MgVCr and MgVTiCrFe High‐Entropy Alloy

Hydrogen storage properties of new A3B2-type TiZrNbCrFe high-entropy alloy

Study on microstructure and the hydrogen storage behavior of a TiVZrNbFe high-entropy alloy

Hydrogen Storage Properties of Ti-Cr-Mn-M (M=V, Fe, Ni, Cu) Alloys

Hydrogen storage in TiZrNbFeNi high entropy alloys, designed by thermodynamic calculations