Abstract:Rare earth elements have excellent catalytic effects on improving hydrogen storage properties of the Mg 2 Ni-based alloys. This study used a small amount of Y to substitute Mg partially in Mg 2 Ni 0.9 Co 0.1 and characterized and discussed the effects of Y on the solidification and de-/hydrogenation behaviors. The Mg 2−x Y x Ni 0.9 Co 0.1 (x = 0, 0.2, 0.3, and 0.4) hydrogen storage alloys were prepared using a metallurgy method. The phase composition of the alloys was studied using X-ray diffraction (XRD). Additionally, their microstructure and chemical composition were studied using scanning electron microscopy and energy-dispersive X-ray spectroscopy, respectively. The hydrogen absorption and desorption properties of the alloys were studied using pressure-composition isotherms and differential scanning calorimetric (DSC) measurements. The structure of the as-cast Mg 2 Ni 0.9 Co 0.1 alloy was composed of the peritectic Mg 2 Ni, eutectic Mg–Mg 2 Ni, and a small amount of pre-precipitated Mg–Ni–Co ternary phases, and was converted into the Mg 2 NiH 4 , Mg 2 Ni 0.9 Co 0.1 H 4 , and MgH 2 phases after hydrogen absorption. Furthermore, the XRD patterns of the alloys showed the MgYNi 4 phase and a trace amount of the Y 2 O 3 phase along with the Mg and Mg 2 Ni phases after the addition of Y. After hydrogen absorption, the phase of the alloys was composed of the Mg 2 NiH 4 , MgH 2 , MgYNi 4 , YH 3 , Y 2 O 3 , and Mg 2 NiH 0.3 phases. With the increase of Y addition, the area ratios of the peritectic Mg 2 Ni matrix phase in the Mg 2−x Y x Ni 0.9 Co 0.1 (x = 0, 0.2, 0.3, and 0.4) alloys gradually decreased until they disappeared. However, the eutectic structure gradually increased, and the microstructures of the alloys were obviously refined. The addition of Y improves the activation performance of the alloys. The alloy only needed one cycle of de-/hydrogenation to complete the activation for x = 0.4. The DSC curves showed that the initial dehydrogenation temperatures of Mg 2 Ni 0.9 Co 0.1 and Mg 1.8 Y 0.2 Ni 0.9 Co 0.1 were 200 and 156 °C, respectively. The desorption activation energies of the hydrides of the Mg 2 Ni 0.9 Co 0.1 and Mg 1.8 Y 0.2 Ni 0.9 Co 0.1 alloys calculated using the Kissinger method were 94.7 and 56.5 kJ/mol, respectively. Moreover, the addition of Y reduced the initial desorption temperature of the alloys and improved their kinetic properties.

Hydriding and dehydriding kinetics of nanocrystalline and amorphous Mg 20Ni 10-xM x (M=Cu, Mn; x = 0-4) alloys prepared by melt spinning

Preparation and Hydrogen Storage Kinetics of Nanocrystalline and Amorphous Mg2ni-Type Alloys

The Electrochemical Hydrogen Storage Characteristics of As-Spun Nanocrystalline and Amorphous Mg20Ni10−xMx (m=cu, Co, Mn; X = 0–4) Alloys

Comparative study of electrochemical performances of the as-melt Mg 20Ni10-xMx (M = None, Cu, Co, Mn; X = 0, 4) alloys applied to Ni/metal hydride (MH) battery

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

A study on the structure and electrochemical properties of La 2Mg(Ni0.95M0.05)9 (M = Co, Mn, Fe, Al, Cu, Sn) hydrogen storage electrode alloys

The Hydriding and Dehydriding Properties of Some Multicomponent Rare-Earth Magnesium Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Microstructures and hydrogen storage characteristics of nanocrystal/amorphous Mg17Al12 alloy prepared by ball-milling

Structure and Hydrogenation Properties of Nanocrystalline Mg2Ni Prepared by Hydriding Combustion Synthesis and Mechanical Milling

Hydriding and dehydriding properties of nanostructured Mg2Ni alloy prepared by the process of hydriding combustion synthesis and subsequent mechanical grinding

Synthesis and Hydrogen Sorption Characteristics of Mechanically Alloyed Mg(NixMn1-x)2 Intermetallics

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Microstructure and hydrogen storage properties of the Mg2−xYxNi0.9Co0.1 (x = 0, 0.2, 0.3, and 0.4) alloys

Electrochemical Performances of the As-Melt La0.75−xMxMg0.25Ni3.2Co0.2Al0.1 (M = Pr, Zr; X = 0, 0.2) Alloys Applied to Ni/metal Hydride (MH) Battery

Study on Microstructure and Hydrogen Storage Properties of Mg80Ni16−xAlxY4 (x = 2, 4, 8) Alloys