Abstract:Nowadays, catalytic doping has been regarded as one of the most promising and effective methods to improve the sluggish kinetics of magnesium hydride (MgH2). Herein, we synthesized Ni/TiO2 nanocomposite with the particle sizes about 20 nm by an extremely facile solvothermal method. Then, the Ni/TiO2 nanocomposite was doped into MgH2 to enhance its reversible hydrogen storage properties. A remarkably enhancement of de/rehydrogenation kinetics of MgH2 can be achieved by doped with Ni/TiO2 nanocomposite, compared to that solely doped with Ni or TiO2 nanoparticles. The hydrogen desorption peak temperature of MgH2-Ni/TiO2 is 232 degrees C, which is 135.4 degrees C lower than that of ball-milled MgH2 (367.4 degrees C). Moreover, the MgH2-Ni/TiO2 can desorb 6.5 wt% H-2 within 7 min at 265 degrees C and absorb similar to 5 wt% H-2 within 10 min at 100 degrees C. In particular, the apparent activation energy of MgH2-Ni/TiO2 is obviously decreased from 160.5 kJ/mol (ball-milled MgH2) to 43.7 +/- 1.5 kJ/mol. Based on the analyses of microstructure evolution, it is proved that metallic Ni particles can react with Mg easily to form fine Mg2Ni particles after dehydrogenation, and the in-situ formed Mg2Ni will transform into Mg2NiH4 in the subsequent rehydrogenation process. The significantly improved hydrogen absorption/desorption properties of MgH2-Ni/TiO2 can be ascribed to the synergistic catalytic effect of reversible transformation of Mg2Ni/Mg2NiH4 which act as "hydrogen pump", and the multiple valence titanium compounds (Ti4+/3+/2+) which promote the electrons transfer of MgH2/Mg. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Hydriding and dehydriding properties of nanostructured Mg2Ni alloy prepared by the process of hydriding combustion synthesis and subsequent mechanical grinding

Structure and Hydrogenation Properties of Nanocrystalline Mg2Ni Prepared by Hydriding Combustion Synthesis and Mechanical Milling

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydrogen storage properties of Mg-23.3wt.%Ni eutectic alloy prepared via hydriding combustion synthesis followed by mechanical milling

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

The effects of mechanical grinding on the hydrogen storage properties of MlNi4.7Al0.3 alloy

Excellent Synergistic Catalytic Mechanism of In-Situ Formed Nanosized Mg2Ni and Multiple Valence Titanium for Improved Hydrogen Desorption Properties of Magnesium Hydride

Hydriding and dehydriding kinetics of nanocrystalline and amorphous Mg 20Ni 10-xM x (M=Cu, Mn; x = 0-4) alloys prepared by melt spinning

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Hydriding/dehydriding properties of La2Mg16Ni alloy prepared by ball milling in different milling environments

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Preparation and hydrogen storage properties of Mg-20 wt.% Mg 2Ni0.8Cr0.2 composite with TiO2 nanoparticles

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Hydrogenation Properties of Mechanically Milled Mg2Ni0.8Cr0.2-CoO/Al2O3 Composites.

Magnesium-nickel Hydrogen Storage Alloys Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling

Hydriding combustion synthesis of Mg–CaNi5 composites

Hydrogen Storage Properties of Mg100−xNix (x = 5, 11.3, 20, 25) Composites Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling (HCS + MM)

Hydriding Behavior of Magnesium-Based Hydrogen Storage Alloy Modified by Mechanical Ball-Milling

Electrochemical properties of amorphous Mg–Fe alloys mixed with Ni prepared by ball-milling