Abstract:Hydrogen, as a cheap, clean, and cost-effective secondary energy source, performs an essential role in optimizing today's energy structure. Magnesium hydride (MgH2 ) represents an attractive hydrogen carrier for storage and transportation, however, the kinetic behavior and operating temperature remain undesirable. In this work, a dual-phase multi-site alloy (MsA) anchored on carbon substrates was designed, and its superior catalytic effects on the hydrogen storage properties of MgH2 were reported. Mechanism analysis identified that multi-site FeNi3 /NiCu nanoalloys synergistically served as intrinsic drivers for the striking de/hydrogenation performance of the MgH2 -MsA systems. Concretely, the unique multi-metallic site structure attached to the surface of MgH2 provided substantial reversible channels and accessible active sites conducive to the adsorption, activation, and nucleation of H atoms. In addition, the coupling system formed by FeNi3 and NiCu dual-phase alloys further enhanced the reactivity between Mg/MgH2 and H atoms. Hence, the onset dehydrogenation temperature of MgH2 + 5 wt% MsA was reduced to 195 degrees C and the hydrogen desorption apparent activation energy was reduced to 83.6 kJ/mol. 5.08 wt% H2 could be released at 250 degrees C in 20 min, reaching a high dehydrogenation rate of 0.254 wt% H2 /min, yet that for MgH2 at a higher temperature of 335 degrees C was only 0.145 wt% H2 /min. Then, the dehydrogenated MgH2 -MsA sample could absorb hydrogen from room temperature (30 degrees C) and charge 3.93 wt% H2 at 100 degrees C within 20 min under 3.0 MPa H2 pressure. Benefiting from carbon substrates, the 5 wt% MsA doped-MgH2 could still maintain 6.36 wt% hydrogen capacity after 20 cycles. In conclusion, this work provides experimental rationale and new insights for the design of efficient catalysts for magnesium-based solid-state hydrogen storage materials. (c) 2024 Published by Elsevier B.V. on behalf of Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences.

Hydrogen storage properties of Mg-23.3wt.%Ni eutectic alloy prepared via hydriding combustion synthesis followed by mechanical milling

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Magnesium-nickel Hydrogen Storage Alloys Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydrogen Storage Properties of Mg100−xNix (x = 5, 11.3, 20, 25) Composites Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling (HCS + MM)

Structure and Hydrogenation Properties of Nanocrystalline Mg2Ni Prepared by Hydriding Combustion Synthesis and Mechanical Milling

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Hydrogen Storage Properties of Mg-doped Ti 1.2 Fe Alloys Synthesized by Mechanical Alloying

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Optimizing FeCoNiCrTi High-Entropy Alloy with Hydrogen Pumping Effect to Boost De/hydrogenation Performance of Magnesium Hydride

The Remarkably Improved Hydrogen Storage Performance of MgH2 by the Synergetic Effect of an FeNi/rGO Nanocomposite.

Dual-tuning of de/hydrogenation kinetic properties of Mg-based hydrogen storage alloy by building a Ni-/Co-multi-platform collaborative system

Hydrogen storage properties of magnesium hydride catalyzed by Ni-based solid solutions

The Recent Progress in the Preparation of Magnesium Based Hydrogen Storage Materials by Hydriding Combustion Synthesis

Efficient Catalysis of FeNiCu-based Multi-Site Alloys on Magnesium-Hydride for Solid-State Hydrogen Storage

Preparation and hydrogen storage properties of Mg-20 wt.% Mg 2Ni0.8Cr0.2 composite with TiO2 nanoparticles

Hydriding and dehydriding properties of nanostructured Mg2Ni alloy prepared by the process of hydriding combustion synthesis and subsequent mechanical grinding

High Active Hydrogen Storage Alloy Mg<sub>2</sub>NiH<sub>4</sub> and Mg<sub>2</sub>Ni Synthesized at Temperatures Lower than 733 K