Abstract:This work demonstrated the combination of the self-assembly of a block copolymer with the well-established non-solvent induced phase separation process. Nanoporous films were obtained with well-ordered cylinder pores perpendicular to the film surfaces on top of a non-ordered bicontinous porous layer. Numerous parameters during the film formation process, including the concentration of casting solution, the solvent evaporation time, the temperature of precipitation bath, and the gate height of doctor blade, were systematically investigated to realize the effective control of surface morphology. Voronoi tessellation was first introduced to quantitatively describe the regularity of the surface pattern. It was found that the concentration of casting solution and the solvent evaporation time have synergetic influences on the porous structures. With the increase of concentration, the minimum evaporation time needed for a well-ordered porous surface decreases. If keep the concentration as a constant, the evolution of surface morphologies from non-ordered cylinder pores to ordered cylinder pores, and then to lamellar pores, was observed with the increase of evaporation time. Although lots of combinations of these two parameters can be utilized for the well-ordered structure formation, the mean pore size of the film surface didn't change significantly with the change of film preparation conditions. Besides, the decrease of the temperature of precipitation bath also helped to improve surface pattern regularity. Further study revealed that once the gate height of casting solution was decreased, the evaporation of solvent induced more significant change of casting solution concentration and the solvent composition, resulting in the disappearance of well-ordered cylinder pores. Two ways, including decreasing the solvent evaporation time and applying the solvent annealing process, were proven to be very effective to prepare thinner films with well-ordered nanoporous structures. The above results greatly broaden the operation window and provide possibilities to fabricate films suitable for different applications.

Formation of Novel Microstructured SiCNO Films from Block Copolymer Micellar‐Templating Approaches

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Manipulation Of Phase And Microstructure At Nanoscale For Sic In Molten Salt Synthesis

Core-Shell and Zigzag Nanostructures from a Thin Film Silicon-Containing Conformationally Asymmetric Triblock Terpolymer

Stabilizing Surfactant Templated Cylindrical Mesopores In Polymer And Carbon Films Through Composite Formation With Silica Reinforcement

Thermal evaporation and solution strategies to novel nanoarchitectures of silicon carbide

Controlled Growth of One-dimensional 3C–SiC nanostructures with stable morphology

Si and SiOx Nanostructures Formed Via Thermal Evaporation

Syntheses and Growth Mechanisms of 3C-Sic Nanostructures from Carbon and Silicon Powders.

Structural Evolution and Nanodomain Formation in Blend Films of a Block Copolymer and Homopolymer†.

Preparation and Morphology Control of Highly Ordered Nanoporous Films from Block Copolymers

Hierarchically Structured Porous Films of Silica Hollow Spheres Via Layer-by-layer Assembly and Their Superhydrophilic and Antifogging Properties.

Controlling the primary particle evolution process towards silica monoliths with tunable hierarchical structure.

Self-cleaning Poly(dimethylsiloxane) Film with Functional Micro/nano Hierarchical Structures.

Synthesis of crack-free silica monoliths with cubic mesostructures by a fast evaporation process

A Simple Approach to Controllably Grow Network-Like Branched Single-Crystalline Si3n4 Nanostructures

Investigation of PECVD SiC nano film

The Nc-Si Films With Controlled Crystal Structure And Electrical Conductivity Via The Re-Crystallization Approach

Nano-Confinement Effects on Structural Development and Organic Solvent-Induced Swelling of Ultrathin Carbon Molecular Sieve Films

In‐situ combustion synthesis of spherical Si@Si3N4 granules

Preparation of Monotrimethoxylsilylethyl-Terminated Polysiloxane Fluids and Their Application in Thermal Interface Materials