Abstract:As a critical factor affecting compressor performance, the influence of a rotor-stator axial clearance on rotating stall characteristics remains unclear. In the process of understanding the compressor stall mechanism, the relationship between the rotor stall characteristics of a 1.5-stage compressor and the downstream stator is studied. In this paper, numerical simulation is mainly utilized to study the change in flow field behavior and rotor performance during the stall process under the enlargement of axial clearance between rotor and downstream stator. The experimental signals and compressor characteristics are used to verify the numerical results. The numerical results show that the spanwise distribution of flow capacity changes while the stall margin decreases with the enlargement of axial clearance, and the disturbances intensity during the stall process is different. Firstly, the pressure signals during the stall process are analyzed. The frequency band of rotating instability decreases from 0.55BPF to 0.44BPF and the intensity decreases by 50% under the large clearance, and the stall inception appears in advance with a opposite change in the circumferential propagation velocity. Then, the variations of throughflow characteristics, rotor-stator interference and tip leakage flow in different phases are investigated. It is found that the increase of axial clearance leads to flow field blockage aggravates at the tip and weakens at the root. For the high intensity wakes at the tip region, the vortex scale increases more in the larger axial clearance, enhancing the negative effect of velocity deficit on stator separation. The axial momentum ratio is used to quantitatively describe the instability degree of tip leakage flow. The severer flow blockage at the tip region leads to higher tip leakage flow axial momentum ratio and the advanced onset of stall. Finally, further investigation of the stall cell flow mechanism shows that the tornado vortex structure formed by the interaction between lateral vortex and tip secondary vortex can be regarded as the flow criterion of spike stall, which is generated in both models.

Effects of Tip Clearance Size on Flowfield in a Low-Speed Axial Compressor Rotor

Influence of Rotor-Stator Axial Clearance on Compressor Rotating Stall Characteristics

Effects of Circumferentially Non-Uniform Clearance on the Spanwise Flow Characteristics in a Transonic Compressor Rotor

Effects of tip clearance on flow field and performance of a centrifugal compressor

Effect of Tip Clearance on the Aeroelastic Stability of a Wide-Chord Fan Rotor

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Effect of Tip Clearance on Compressor Performance

Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor

Pressure and Velocity Fluctuations Characteristics of the Tip Clearance Flow in an Axial Compressor Stage at the Near-Stall Condition

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Influence of Tip Clearance on Performance of A Contra-Rotating Fan

Effect of Tip Clearance on Rotating Stall in a Mixed-Flow Pump

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

Effect of Nonuniform Tip Clearance on the Performance of Transonic Axial Compressors

Experiment on Tip Flow Property of High Speed Axial Flow Compressor

A numerical study on the tip clearance in an axial transonic compressor rotor

Unsteady near-stall flow mechanisms in a transonic compressor rotor at different rotating speeds

Unsteady Analysis on the Effects of Tip Clearance Height on Hot Streak Migration Across Rotor Blade Tip Clearance

Numerical investigation on short length-scale disturbance generation in an eccentric axial compressor rotor at a stable condition

Tip leakage flow, tip aerodynamic loading and rotating instability in a subsonic high-speed axial flow compressor rotor