Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Microcavity Connceted With A Waveguide For Application To Optical Sensing

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Engineering Waveguide-Cavity Resonant Side Coupling in A Dynamically Tunable Ultracompact Photonic Crystal Filter

Coupled Optical Microcavities: an Enhanced Refractometric Sensing Configuration

Silicon optical waveguides using photonic bandgap for bioparticle sensing

Optical Waveguide Double-Ring Sensor Using Intensity Interrogation with a Low-Cost Broadband Source

Highly Sensitive Optical Fiber Micro-Cavity Sensors

Micro Sensors Based on Planar Microtoroid Cavities

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Dual Waveguide Coupled Microring Resonator Sensor Based on Intensity Detection

Highly Sensitive Sensor Based on an Ultra-High-Q Mach-Zehnder Interferometer-Coup Led Microring

High-mechanical-frequency Characteristics of Optomechanical Crystal Cavity with Coupling Waveguide.

Experimental Investigation of Waveguide Sensor Based on Cascaded-Microring Resonators with Vernier Effect

Integrated micro-and nano optical cavities on a chip for supersensitive sensing

Optomechanical Sensing with On-Chip Microcavities

High-Q Width Modulated Photonic Crystal Stack Mode-Gap Cavity and Its Application to Refractive Index Sensing.

Study of Photonic Crystal Cavities for Biosensors

Enhanced temperature sensing by multi-mode coupling in an on-chip microcavity system

Light Confinement in A Low-Refraction-Index Microcavity Bonded on A Silicon Substrate

End-fire injection of guided light into optical microcavity