Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Silicon optical waveguides using photonic bandgap for bioparticle sensing

Design of a photonic crystal microcavity for biosensing

Study of Photonic Crystal Cavities for Biosensors

Photonic-bandgap microcavities in optical waveguides

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Integration of High Transmittance Photonic Crystal H2 Nanocavity and Broadband W1 Waveguide for Biosensing Applications Based on Silicon-on-Insulator Substrate

High- Q Photonic Crystal Cavity in a Single-Mode Silicon Ridge Waveguide

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Parabolic Tapered Coupled Two Photonic Crystal Nanobeam Slot Cavities for High-FOM Biosensing

Multi-channel Biosensor Based on Photonic Crystal Waveguide and Microcavities

Microcavity Connceted With A Waveguide For Application To Optical Sensing

Porous silicon-based two-dimensional photonic crystal for biochemical sensing applications

Design of a High Q-Factor Label-Free Optical Biosensor Based on a Photonic Crystal Coupled Cavity Waveguide

High-Q Width Modulated Photonic Crystal Stack Mode-Gap Cavity and Its Application to Refractive Index Sensing.

Design and Characterization of Line-Defected Silicon Waveguide and High-Q Optical Cavity

High-Performance Microcavity Optical Sensor Connected With A Waveguide

Photonic crystal-based optical biosensor: a brief investigation

A Photonic Crystal Sensor Array Side-Coupled to a Linear Waveguide with Enhanced Bandwidth

Optimization of One Dimensional Photonic Crystal Elliptical-Hole Low-Index Mode Nanobeam Cavities for On-Chip Sensing

High-Q, High Sensitivity and Wide Bandgap Low-Index-mode Elliptical Holes Photonic Crystal Nanobeam Cavities Biosensors