Abstract:Single silicon nanobeam photonic crystal cavity based sensors are systematically analyzed and designed. By using perturbation theory and numerical simulations, both dielectric-mode and air-mode cavities are extensively investigated in terms of sensitivity (S), figure of merit (FOM), detection limit (DL), footprint size, and coupling scheme. The analytical study reveals a sensitivity limit of 1176 nm/RIU and a maximum figure of merit of 5070 for nanobeam cavity based sensors, due to the absorption of light near 1550 nm wavelength. when water is used as the carrier fluid. Design of high FOM (> 4800) nanobeam cavities is demonstrated with S of 291 and 232 nm/RIU for air modes and dielectric modes, respectively. The calculation results indicate that on a 220-nm-thick-silicon SOI platform, it is possible to design a nanobeam cavity based biosensor with DL on the order of 4 × 10-6 RIU, insertion loss of -30 dB, and cavity length less than 40a (a is the lattice constant). To approach the absorption bounded DL, the presented design is adequate when analyte absorption dominates the loss, regardless if it is for dielectric modes or air modes. These results would be conducive to clarification of the confusion on the priority of air mode and dielectric mode in designing nanobeam cavities based sensors, as well as recent considerable efforts to maximize Sand FOM.

Study of Photonic Crystal Cavities for Biosensors

Photonic crystal-based optical biosensor: a brief investigation

Improving Sensitivity of Photonic Crystal-Based Biosensors by a Cavity Arrangement

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Design of a highly sensitive photonic crystal waveguide platform for refractive index based biosensing

Silicon optical waveguides using photonic bandgap for bioparticle sensing

Design of a photonic crystal microcavity for biosensing

Multi-channel Biosensor Based on Photonic Crystal Waveguide and Microcavities

Design of a High Q-Factor Label-Free Optical Biosensor Based on a Photonic Crystal Coupled Cavity Waveguide

Study of photonic crystal cavity sensor integrated with microfluidic channel in the visible region

Slow Light Enhanced Sensitivity of Resonance Modes in Photonic Crystal Biosensors.

Photonic Nano Dielectric Crystal Cavity with Infiltrated Biosamples for Refractive Index Sensing Application

Multiple Fano resonator based on photonic crystal waveguide coupled with two micro-cavities for biomedical sensing application

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

Suspended Slotted Photonic Crystal Cavities for High-Sensitivity Refractive Index Sensing

Research on L3 Photonic Crystal Cavity Sensor Integrated with Microfluidic Channel in the Visible Frequency

Porous silicon-based two-dimensional photonic crystal for biochemical sensing applications

High-sensitivity Silicon-Based Photonic Crystal Refractive Index Biosensor Based on Defect-Mode Coupling

Investigation of Biosensor Built with Photonic Crystal Microcavity

Ultracompact High-Sensitivity Biochemical Sensor Built with Photonic Crystal Nanobeam Cavity

A Photonic Crystal Sensor Array Side-Coupled to a Linear Waveguide with Enhanced Bandwidth