Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Improving Sensitivity of Photonic Crystal-Based Biosensors by a Cavity Arrangement

Study of Photonic Crystal Cavities for Biosensors

Ultracompact High-Sensitivity Biochemical Sensor Built with Photonic Crystal Nanobeam Cavity

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Photonic crystal-based optical biosensor: a brief investigation

Slow Light Enhanced Sensitivity of Resonance Modes in Photonic Crystal Biosensors.

High-Q and High-Sensitivity Photonic Crystal Cavity Sensor

An ultracompact refractive index gas-sensor based on photonic crystal microcavity

Suspended Slotted Photonic Crystal Cavities for High-Sensitivity Refractive Index Sensing

High-Q Width Modulated Photonic Crystal Stack Mode-Gap Cavity and Its Application to Refractive Index Sensing.

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Investigation of Biosensor Built with Photonic Crystal Microcavity

Silicon optical waveguides using photonic bandgap for bioparticle sensing

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

An Integrative Biosensor Based on Contra-Directional Coupling Two-dimensional Photonic Crystal Waveguides

Multiple Fano resonator based on photonic crystal waveguide coupled with two micro-cavities for biomedical sensing application

Photonic crystal resonances for sensing and imaging

A Photonic Crystal Hollow-Core Cavity for On-Chip Molecule Sensing

Label-free Biosensing Using a Photonic Crystal Structure in a Total-Internal-reflection Geometry

Slotted photonic crystal nanobeam cavity with parabolic modulated width stack for refractive index sensing.

Highly sensitive plasmonic sensor based on scaled down air holes assisted photonic crystal fiber for biosensing applications