Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Light Confinement in A Low-Refraction-Index Microcavity Bonded on A Silicon Substrate

Fabrication of Optical Cavities with Femtosecond Laser Pulses

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

High-Q whispering gallery mode directly on a silicon substrate

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

Guiding Light Through Optical Bound States in the Continuum for Ultrahigh‐q Microresonators

Ice Microsphere Optical Cavities

Subwavelength Confinement in an All-Dielectric Slot Waveguide with Bound States in the Continuum for Ultrahigh-Q Microresonators

Tunable Ultra‐Narrow Linewidth Light Source Through Liquid Crystal‐Assisted Mini‐Bound‐States‐In‐Continuum Cavities

High- Q Photonic Crystal Cavity in a Single-Mode Silicon Ridge Waveguide

Facile microfluidic fabrication of monodispersed self-coupling microcavity with fine tunability

Implementation of a High- $Q$ , Small Mode Volume Cavity in Microfibers Using Lattice-Constant-Varying Nanohole Arrays

Microcavities: Highly Unidirectional Emission and Ultralow‐Threshold Lasing from On‐Chip Ultrahigh‐Q Microcavities (adv. Mater. 35/2012)

A Hollow‐Core Optical Cavity Built in a Three‐Layer Silicon Photonic Crystal

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

A Microfiber Cavity with Minimal-Volume Confinement

Free-space Coupled, Ultralow-Threshold Raman Lasing from a Silica Microcavity

Formation of Quasi-Bound States in the Continuum in a Single Deformed Microcavity

Tubular oxide microcavity with high-index-contrast walls: Mie scattering theory and 3D confinement of resonant modes.

Advanced silicon photonic microcavities for routing, detection and lasing applications

Advances and Prospects for Whispering Gallery Mode Microcavities