Abstract:The galloping of iced conductors has long been a severe threat to the safety of overhead transmission lines. Compared with normal transmission lines, the ultra-high-voltage (UHV) transmission lines are more prone to galloping, and the damage caused is more severe. To control the galloping of UHV lines, it is necessary to conduct a comprehensive analysis of galloping characteristics. In this paper, a large-span 1000-kV UHV transmission line in China is taken as a practical example where an 8-bundled conductor with D-shaped icing is adopted. Galerkin method is employed for the time history calculation. For the wind attack angle range of 0 degrees similar to 180 degrees, the galloping amplitudes in vertical, horizontal, and torsional directions are calculated. Furthermore, the vibration frequencies and galloping shapes are analyzed for the most severe conditions. The results show that the wind at 0 degrees similar to 10 degrees attack angles can induce large torsional displacement, and this range of attack angles is also most likely to occur in reality. The galloping with largest amplitudes in all three directions occurs at the attack angle of 170 degrees where the incoming flow is at the non-iced side, due to the strong aerodynamic instability. In addition, with wind speed increasing, galloping modes with higher frequencies appear and make the galloping shape more complex, indicating strong nonlinear behavior. Based on the galloping amplitudes of three directions, the full range of wind attack angles are divided into five galloping regions of different severity levels. The results obtained can promote the understanding of galloping and provide a reference for the anti-galloping design of UHV transmission lines.

The Analysis of Galloping-Endurance Character of 500kv Power Transmission Tower

Analysis of the Conductor Tension During Galloping for a 500kv 6-Bundled Overhead Transmission Line

Investigation on Galloping of D-Shape Iced 6-Bundle Conductors in Transmission Tower Line

Mechanical Behavior Analysis of Key Nodes for Extra-highTransmission Tower Foundations

Experimental study on features of galloping response of tower-line system for transmission

Theoretical analysis and countermeasures on the galloping of iced overhead transmission lines in Hubei in early 2015

Galloping Fault Analysis and Computation for 500 kV Double Lines in One Tower in Henan Grid

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

A theoretical model of rain–wind–induced in-plane galloping on overhead transmission tower-lines system

Analysis on Galloping Properties from Transmission Line Vibration Data

Analysis on Effect of Protecting Transmission Lines from Shielding Failure by Sideward Rods Installed Onto Crossarm of Towers

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Galloping characteristics of a 1000-kV UHV iced transmission line in the full range of wind attack angles

Reliability Evaluation for Iced Tower Based on Ultimate Bearing Capacity Analysis

Analysis and Calculation of Extra-long Interphase Spacer For Anti-galloping

Transmission Tower Stress Analysis and Online Monitoring Scheme

Numerical Analysis on the Sub-Span Oscillation of Iced Eight-Bundle Conductors During Galloping

Experimental Analysis on Failure Mechanism of 500kv Transmission Tower under Ice Loading

Analysis on Mechanical Property of 110kv Power Transmission Line Tower under Different Wind Speed

Study on the Effect of Anti-galloping Device with Cubic Stiffness and Particle Damping

Analysis on Broken Conductor Load of Suspension Tower for UHVDC Power Transmission