Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

Optimizing of Thermal Cycler Control in Microfluidic Pcr System

Adaptive Fuzzy Pid Control For Polymerase Chain Reactions

Simulation and experimental study of temprature lag time for Polymerase Chain Reaction instrument

FEA for Steady-State Thermal Performance of PCR Thermal-Cycler Based on Thermoelectric Cooler

Research on thermal cycle system for real-time PCR instrument based on equivalent circuit model

Research on temperature measuring positions selection and verification for Polymerase Chain Reaction instruments.

Study on factors affecting thermal performance of PCR thermal cycle system by equivalent circuit

Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument

Hybrid Control Strategy for Thermal Cycling of Pcr Based on A Microcomputer

Temperature Control Algorithm for Polymerase Chain Reaction (PCR) Instrumentation Based Upon Improved Hybrid Fuzzy Proportional Integral Derivative (PID) Control

Temperature control technology for PCR

A Piecewise Fuzzy Proportional Integral Derivative Control for Polymerase Chain Reaction Thermal Cycling

Temperature Control for PCR Thermocyclers Based on Peltier-Effect Thermoelectric

Temperature Controller of Microfluidic PCR Based on Sectional Lead Correction

Feedforward Variable Structural Proportional-Integral-Derivative for Temperature Control of Polymerase Chain Reaction

Open Thermal Control System for Stable Polymerase Chain Reaction on a Digital Microfluidic Chip

Design of Integrated Control System for Microfluidic PCR Analysis Instrument

Temperature-controlled System of PCR Chips

Implementation of the Inverse Problem for On-chip PCR Diagnostics with Rapid and Precise Thermal Cycling

Labview-based Microfluidic PCR PID Temperature Control System

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument