Abstract:Geopolymer, owing to its inherent low-carbon emission advantages, emerges as a potential substitute to diminish reliance on high-carbon-emitting Portland cement. Nonetheless, similar to ordinary Portland cement concrete, geopolymer concrete tends to exhibit brittle fracture under cyclic bending loads. To improve its flexural fatigue performance, this paper incorporated the modified basalt (MB) fiber and PVA fiber in hybrid form into the geopolymer concrete. The flexural fatigue behavior of hybrid fibers reinforced geopolymer concrete was investigated, with a focus on the influence of varying hybrid fibers volume fractions. Digital Image Correlation technology was utilized to accurately track the evolution of crack length and the local strain field during the fatigue failure process. The results revealed that the incorporation of both MB and PVA fibers effectively delayed the initiation and propagation of cracks, leading to a more complex path of fatigue cracks. The PVA fiber demonstrated significant efficacy in inhibiting microcracks, while the MB fiber played a crucial role in controlling the expansion of macroscopic cracks. When the proportion of MB fiber was predominant in the hybrid mix, the crack development pattern mirrored that of samples containing MB fiber alone, exhibiting a greater extent of crack length. At a volume fraction of 0.9% for MB fiber and 0.2% for PVA fiber, a significant improvement in the fatigue life of the concrete was observed, resulting in a remarkable 136.23% increase compared to the control. This study has developed geopolymer concrete featuring enhanced crack resistance and superior flexural fatigue endurance under cyclic loading, promoting the application of environmentally friendly building materials in practical engineering.

Study on Flexural Toughness and Crack Path Prediction for Polymer-Modified Concrete

Polymer-modified Concrete with Improved Flexural Toughness and Mechanism Analysis

Strength and Early Crack Resistance Experiment of Polypropylene Fiber Reinforced Concrete with Silicon Powder

Mechanical Properties of Polymer Modified Concrete with Steel Fiber

Optimizing concrete performance with polymer-cement networks: Enhanced flexural strength and crack resistance

Experimental Study on the Flexural Fatigue Performance of Slag/fly Ash Geopolymer Concrete Reinforced with Modified Basalt and PVA Hybrid Fibers

Fatigue Performance and Multiscale Mechanisms of Concrete Toughened by Polymers and Waste Rubber

Study on macro and micromechanical properties of polypropylene fiber reinforced rubber-based flexible energy-consuming concrete

Effect Of Composite Polymer On Compressive Strength And Microstructure Of Concrete

Influence of Fiber Type on Concrete Flexural Toughness

Experimental on the Behavior of Beams Strengthened by Polymer-modified Fiber Cement Mortar Under Hydrothermal Conditions

Experimental study on fracture properties of self-compacting concrete

Experimental investigations on tensile strength and fracture toughness of a polyoxymethylene fiber reinforced concrete

Experimental Study on the Mechanical Properties and Durability of High-Content Hybrid Fiber-Polymer Concrete

Mechanical Properties of Polymer Reinforced Concrete at High Strain Rate and Analysis of Its Micro-mechanism

Fracture Toughness And Microstructure Of Concrete At Early-Ages

The Mechanical Properties of Polymer-cement Mortar

Experiment on the Flexural Properties of Simply Supported Polypropylene Fibers Reinforced Concrete Beams

Experimental Investigation of Cracking and Impact Resistance of Polymer- and Fiber-Enhanced Concrete for Ultra-Thin Whitetopping

Fracture Mechanisms of Polymer Cement Mortar: Concrete Interfaces

Performance Research on Polymer Latex Modified Waterproofing Concrete