Abstract:Fiber concrete exhibits superior performance in various aspects compared to plain concrete and has been widely researched and applied worldwide. However, many industrially made fibers are expensive, and their cost has to be considered before use; thus, it would be economically valuable to find inexpensive fibers with excellent properties to make fiber concrete. Rural areas have many rich straw resources to be disposed of; at the same time, the rapid development of the automobile industry has introduced a large number of used tires containing steel wire with a very low reuse rate. These two low-cost materials can be processed to make fibers, making the study of mechanical properties regarding their incorporation into concrete practically significant for reducing the cost of fiber concrete. Based on this, a three-factor, three-level orthogonal test was conducted to investigate the effects of different dosages of corn straw fibers and scrap steel fibers, as well as the water-cement ratio, on the mechanical properties of concrete. The optimum level of each factor for blended straw-waste-steel-fiber concrete with different mechanical properties was obtained using the polar and ANOVA methods. It was found that the compressive strength, splitting tensile strength, flexural strength, and impact resistance of the specimens after fiber dosing were better than those of plain concrete specimens with the same water-cement ratio. The maximum improvement was 14.96% in cubic compressive strength, 42.90% in tensile strength, and 16.30% in flexural strength, while the maximum improvement in impact energy consumption at the final crack was 228.03%. Combined with SEM microanalysis, the two fibers formed a stronger whole with the C-S-H gel. When the specimen was subjected to load, the two fibers were able to withstand part of the load, thus enhancing the load-bearing capacity. Finally, the optimal mix ratio of blended straw-scrap-steel-fiber concrete was determined to be 0.8% corn straw fibers by volume, 0.6% scrap steel fibers by volume, and a 0.45 water-cement ratio by combining the weights of the levels of each factor under its four different mechanical properties through hierarchical analysis. This analysis of mechanical properties provides a reference for practical applications in future projects.

Mechanical Properties of Polymer Modified Concrete with Steel Fiber

Experimental Study on the Mechanical Properties and Durability of High-Content Hybrid Fiber-Polymer Concrete

Experimental Study on Mechanical and Durability Properties of Glass and Polypropylene Fiber Reinforced Concrete

Experimental on the Behavior of Beams Strengthened by Polymer-modified Fiber Cement Mortar Under Hydrothermal Conditions

The Effects of Steel Fiber Types and Volume Fraction on the Physical and Mechanical Properties of Concrete

Experimental study on mechanical behavior of PE fiber cementitious composite

The interfacial characteristic of steel fiber reinforced polymer cement composites

The Research Of Polymer-Modified Concrete And Its Application In The Emergent Repair Of Highway

Mechanical performance of steel-polypropylene hybrid fiber reinforced concrete subject to uniaxial constant-amplitude cyclic compression: Fatigue behavior and unified fatigue equation

Mechanical Properties of Polymer Reinforced Concrete at High Strain Rate and Analysis of Its Micro-mechanism

Fracture Properties and Softening Curves of Steel Fiber-Reinforced Slag-Based Geopolymer Mortar and Concrete

Influence of Fiber Type on Concrete Flexural Toughness

Study on macro and micromechanical properties of polypropylene fiber reinforced rubber-based flexible energy-consuming concrete

Mechanical Properties and Axial Compression Deformation Property of Steel Fiber Reinforced Self-Compacting Concrete Containing High Level Fly Ash

Influence of Polypropylene and Steel Fibers on the Performance and Crack Repair of Self-Compacting Concrete

Mechanical properties and corrosion resistance of high performance fiber-reinforced concrete with steel or amorphous alloy fibers

Mechanical Properties and Microanalytical Study of Concrete Reinforced with Blended Corn Straw and Scrap Steel Fibers

Rheological, mechanical, and abrasion characteristics of polymer-modified cement mortar and concrete

Mechanical Properties of Fully Recycled Aggregate Concrete Reinforced with Steel Fiber and Polypropylene Fiber

Optimisation of polypropylene and steel fibres for the enhancement of mechanical properties of fibre-reinforced concrete

Mechanical and permeability properties of polymer-modified concrete using hydrophobic agent