Abstract:With the increasing number of waste tires, rubberized concrete, as a sustainable building material, has garnered widespread attention for its performance and environmental benefits. This study utilized KH-570 modified rubber particles to replace ordinary sand in the preparation of concrete, assessing the workability, shrinkage performance, and axial compression characteristics of rubberized concrete, and establishing a stress-strain constitutive model. The research indicates that the introduction of rubber particles enhances the irregularity and roughness of particles within the concrete matrix, leading to increased inter-particle friction and a reduction in workability. Pre-treatment with KH-570 effectively improves workability, particularly when the rubber content is 15%. Rubberized concrete exhibits higher ductility and slower crack propagation rates, with a decrease in elastic modulus and peak stress as rubber content increases, indicating an enhancement in the deformability and toughness of the concrete. The KH-570 pre-treatment partially counteracts this trend and significantly improves the energy absorption capacity of the concrete. The addition of unmodified rubber particles leads to an increased shrinkage rate in concrete, while the surface pre-treatment with KH-570 enhances the adhesion of rubber to the cementitious matrix, mitigating concrete shrinkage. The proposed axial stress-strain constitutive model for rubberized concrete accurately predicts the mechanical characteristics during the transition from elastic to plastic behavior. Rubberized concrete significantly reduces carbon dioxide emissions per unit volume, especially in untreated rubberized concrete, and offers better cost-effectiveness. In the construction of airport patrol roads, rubberized concrete demonstrates excellent durability and lower maintenance costs. In summary, rubberized concrete not only improves the ductility and toughness of concrete but also offers significant environmental and economic benefits, making it a promising sustainable building material.

Fatigue Performance and Multiscale Mechanisms of Concrete Toughened by Polymers and Waste Rubber

Effect of Fiber on Mechanical Properties of Cement Stabilized Macadam Mixture

Experimental Study on the Flexural Fatigue Performance of Slag/fly Ash Geopolymer Concrete Reinforced with Modified Basalt and PVA Hybrid Fibers

Study on macro and micromechanical properties of polypropylene fiber reinforced rubber-based flexible energy-consuming concrete

Influence of Basalt/Polypropylene Fiber on Permeability and Uniaxial Compressive Properties of Waste Tire Rubberized Concrete

Optimizing concrete performance with polymer-cement networks: Enhanced flexural strength and crack resistance

Fatigue Degradation Properties of Pcm-Concrete Interface

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Experimental Investigation of Cracking and Impact Resistance of Polymer- and Fiber-Enhanced Concrete for Ultra-Thin Whitetopping

Preparation and Mechanical-Fatigue Properties of Elastic Polyurethane Concrete Composites

Mechanical performance and anisotropic analysis of rubberised 3D-printed concrete incorporating PP fibre

Fracture properties and mechanisms of steel fiber and glass fiber reinforced rubberized concrete

Experimental study on damping properties of rubber powder modified styrene-acrylic emulsion concrete beam

Flexural fatigue performance and damage evolution analysis of multiscale polypropylene fiber‐reinforced concrete

Study on static and dynamic mechanical properties and microstructure of silica fume-polypropylene fiber modified rubber concrete

Polymer-modified Concrete with Improved Flexural Toughness and Mechanism Analysis

Tensile Strength and Mode I Fracture Toughness of Polymer Concretes Enhanced with Glass Fibers and Metal Chips

Experimental Study on the Mechanical Properties and Durability of High-Content Hybrid Fiber-Polymer Concrete

Performance analysis and engineering application of waste rubber crumbs in concrete

Compressive Test Investigation and Numerical Simulation of Polyvinyl-Alcohol (PVA)-Fiber-Reinforced Rubber Concrete

Modifying fatigue performance of reactive powder concrete through adding pozzolanic nanofillers