Abstract:In a vertical shaft impact crusher, the particle crushing process is extraordinarily complex, and the particle shape significantly influences the size distribution of the crushed product. To quantify the crushing behavior of particles more accurately and thus reveal the crushing mechanism of the crusher, an analytical approach is suggested for characterizing the crushing distribution of particles subjected to rotational impact. First, according to the working principle of vertical shaft impact crusher, a rotary impact tester was designed, and the cumulative damage model of particles under repetitive impact was established based on the theory of fracture mechanics, based on which the simulation model of single-particle rotary impact tester was constructed. Then, seven distinct particle shapes were established based on the particle shapes observed during the crusher's actual production. Finally, an investigation was conducted using the simulation model to examine the impact of various rotor velocities and particle shapes on the macroscopic mechanical properties and crushing distribution attributes of single-particle crushing. In the single-particle rotary impact crushing experiments, the findings indicated that the particle crushing transpired at the site of contact with the anvil. The particle size distribution of subparticles generated through the crushing with distinct particle shapes all exhibit single-peak characteristics as rotor speed increases. The magnitude of the peak value progressively escalates in tandem with the rotor speed increase. Furthermore, as the rotor speed increases, so do the cumulative mass distribution and the maximum continuous crushing cumulative mass. When the horizontal aspect ratio of the particles is V < 1 and V > 1, the crushing effect of the particles is poor at the same rotational speed; the curve of the maximum continuous crushing degree has an inverted "V″ shape. The crushing effect of the particles improves as their edges become progressively sharper, and the maximum continuous crushing degree of the particles increases as the edge sharpness of the particles advances.

Simulation Analysis for Rotor’s Strength of Impact Crusher

Dynamic Analysis of Tip Set Extra Hard Load of Vertical Shaft Impact Crusher

SIMULATION BASED DESIGN AND ANALYSIS OF IMPACT PLATE OF THE IMPACT CRUSHER

Study on Main Butt Ends Load of Vertical Shaft Impact Crusher

DEM Simulation of an Impact Crusher Using the Fast-Cutting Breakage Model

FEM Simulation Analysis on the Impact Force of Impact Crusher

Research on the Load Distribution of Throwing Ends in Vertical Shaft Impact Crusher

Simulation Analysis of Upper Mould Base for High Speed Punch

The Geometrical Model of Vertical Shaft Impact Crusher Rotor System

Wear of Throwing End of Vertical Shaft Impact Crusher

The Crushing Distribution Morphology of a Single Particle Subjected to Rotary Impact

Energy transfer efficiency and rock damage characteristics of a hydraulic impact hammer with different tool shapes

Experimental validation of impact energy model for the rubimpact assessment in a rotor system

Dynamics Analysis of an Impact-Rub Rotor by Finite Element Method

Finite Element Analysis and Structural Improvement on Jaw Crusher Frame with Compound Pendulum

Shape of Hammers of Hammer Rotors for Inertial Impact Fracture

Numerical Simulation of the Longitudinal Impact of Hammer Percussive Drilling System

Fault States and Simulation Analysis of a Cracked Rotor with Bearing Clearances

Analysis of the Effects of a Rotating Rock on Rockfall Protection Barriers

Crushing Product Size-reduction Analysis of Compressing Crusher

Wear Law and Parameter Optimization Study on the Split Cone of a Vertical Shaft Impact Crusher