Abstract:This work examines the effect of porosity and free water on the behavior of concrete under high confinement. For this purpose, three types of concretes are designed with either low, medium or high porosities but featuring the same aggregate skeleton, yielding: an ordinary referenced concrete (OC), as already characterized in previous studies; a high performance concrete (HPC) with very low capillary porosity; and a low performance concrete (LPC) with the same composition as OC except for a much higher entrained air porosity. The results of triaxial tests, conducted on these three concretes up to a confinement of 600 MPa at both low and high saturation ratios, are presented. The conclusions from past studies on OC are extended herein for the cases of HPC and LPC: the free water quantity exerts a major influence on the concrete strength capacity as well as the volumetric stiffness for all three types of concretes. These results also show that the free water influence on concrete behavior depends on both the amount and nature of this porosity: the effect of modifying the entrained air porosity is much weaker than that of capillary porosity. To better quantify the effect of concrete saturation ratio, results are then completed by triaxial testing performed on OC with intermediate saturation ratios. Lastly, an empirical triaxial failure criterion of concrete, which takes into account the uniaxial strength, porosity and saturation ratio, is proposed; this new criterion accurately reproduces the results presented, as well as, a large database obtained from previous studies.

Characteristics of Pore Structure of Free-Steaming Foamed Concrete and Its Influence on the Compression Strength

Strength and Early Crack Resistance Experiment of Polypropylene Fiber Reinforced Concrete with Silicon Powder

Influence of Fibers and Bubble Structure on Thermal Conductivity and Mechanical Performances of Foam Concrete

Experimental Study of Strength Characteristics of Foam Concrete

Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete

Strength Characteristics of Foam Concrete Under Uniaxial Compression

Relationship Modeling of Pore Structure and Strength of Concrete

Pore Structure and Microstructure of Super Light-Weight Foam Concrete Reinforced by Inorganic Fiber

Influence of Slurry Characteristics on the Bubble Stability in Foamed Concrete

Size effect on compressive strength of foamed concrete: Experimental and numerical studies

Micromechanical Modeling on Compressive Behavior of Foamed Concrete

COMPRESSIVE STRENGTH OF FRACTAL-TEXTURED FOAMED CONCRETE

Study on the Permeability Characteristics of Foamed Concrete Using a Pore-Scale Model from X-Ray Microcomputed Tomography Image Reconstruction and Numerical Simulation

Quantitative Relationship Between Pore Size Distribution and Compressive Strength of Cementitious Materials

EFFECT OF PORE WATER ON THE COMPRESSIVE STRENGTH OF WET CONCRETE

Experimental Research on Soiled-based Foamed Concrete

Micro-mechanism of Static and Dynamic Strengths for Saturated Concrete

Characterization of surface hardness and microstructure of high performance concrete

Effects of stream curing on the pore structure of recycled aggregate concrete

Influence of free water on concrete triaxial behavior: The effect of porosity

Experimental Investigation on the Influencing Factors of Compressive Strength of Foamed Lightweight Material Utilizing Completely Decomposed Granite