Abstract:Introduction. The article addresses the influence of foams, having different origins and expansion ratios, on the structurization of thermal insulation foam concrete. The study is focused on solving the problem of the binder hydration conditions in the interpore space of the foam concrete mixture and maintaining its stability. The goal is to design an economically effective composition. Materials and methods. To analyze the structurization process, foam concrete samples, featuring average density grades D300 and D500, were made using ordinary Portland cement. The nature of the surfactant substance of the foam, its expansion ratio and the water-cement ratio of the solution are the variable factors determining parameters of the material structure. The strength of the foam concrete was used to evaluate the cement hydration conditions. The strength was identified according to GOST 10180. Parameters of the macrostructure were measured using the Levenhuk optical microscope and the LevenhukLite software. Results. It is found that hydration in the interpore space of the mixture is implemented to the fullest extent when a protein foaming agent, featuring a low foam expansion ratio, is used. The foam concrete, thus made, has closed pores, whose diameter varies in a small range of values, while the partition thickness exceeds the maximum size of the cement grain. An increase in the foam expansion ratio and a low value of the water-cement ratio of the solution lead to the uneven distribution of air in the mixture and reduce the thickness of the interpore partition. In this case, the structure of the foam concrete is “friable”; it represents conglomerates of interconnected pores. Conclusions. Since the geometry of the macrostructure of the material has a significant influence on the heat transfer process and strength, the protein foaming agent, featuring a low foam expansion ratio, is preferable for the production of thermal insulation foam concrete using standard Portland cement without re-grinding. Otherwise, a higher foam expansion ratio foam requires an increase in the specific surface area of the binder.

Influence of Fibers and Bubble Structure on Thermal Conductivity and Mechanical Performances of Foam Concrete

Experimental study on pore structure characteristics and thermal conductivity of fibers reinforced foamed concrete

Influence of expanded vermiculite powder and silica fume on properties of foam concretes

Insulation Foam Concrete Nanomodified with Microsilica and Reinforced with Polypropylene Fiber for the Improvement of Characteristics

Characterization and Simulation of Microstructure and Thermal Properties of Foamed Concrete

Thermal Conductivity of Fiber-Reinforced Foam Concrete Filled with Crumb Rubber Powders

The influence of foams, having different expansion ratios, on the structurization of thermal insulation foam concrete

Study on the effectiveness of fibre reinforcement on the engineering performance of foamed concrete

Preparation of nano-carbon black and silica fume modified foam concrete: Compressive strength, pore structure and electromagnetic property

Effects of Mixing Techniques and Material Compositions on the Compressive Strength and Thermal Conductivity of Ultra-Lightweight Foam Concrete

Effect of Different Volume Fraction of Steel Fiber/graphite on Thermal Conductivity and Compressive Properties of Concrete

Investigation of the effect of silica fume and synthetic foam additive on cell structure in ultra-low density foam concrete

Experimental Research on Soiled-based Foamed Concrete

Basalt fiber-reinforced foam concrete containing silica fume: An experimental study

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

Effect of polyethylene powder and heating treatment on the microstructure and hardened properties of foam concrete

Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete

Preparation of a novel foamed concrete modified with carbon fiber and graphite: Mechanical, electro-magnetic and microstructural characteristics based on X-CT

Strength and thermal insulation properties of foam-formed ceramic fiber paper with different reinforcement methods

Effect Analysis of Soil Type and Silt Content on Silt-Based Foamed Concrete with Different Density

Experimental Study of Strength Characteristics of Foam Concrete