Abstract:This research explored effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures of fly ash (FA) and ground granulated blast furnace slag powder (SL). The two types of C55 strength grade concretes (one is pure cement concrete, another one is concrete, replacing part of cement with 12% FA and 18% SL) were prepared and their compressive strength, chloride diffuse on coefficient and carbonation depth under the standard and steam curing conditions were measured and compared. The phase composition and microstructure of the concretes under the two curing conditions were tested by X-ray diffraction (XRD), scanning electron microscope (SEM) and mercury intrusion porosimeter (MIP). The results show that, on the one hand, compared with standard curing, steam curing is beneficial to the early strength, but not conducive to the later strength development and chloride permeability resistance of both two types of concretes. Furthermore, for the steam cured concrete, the 28d carbonation depth of the forming surface is higher than that of the bottom surface. What's more, steam curing can reduce the carbonization resistance of pure cement concrete and improve the carbonization resistance of concrete mixed with FA and SL. On the other hand, composite mineral admixtures of FA and SL reduce the early strength, the carbonization resistance of concrete cured with standard curing, but improve the later strength, the carbonization resistance and chloride permeability resistance of concrete cured with steam curing. FA and SL are thermally activated under steam curing and can react with the calcium hydroxide formed by cement hydration in the early stage, which produces larger amount of secondary hydration products to improve the pore structure and interfacial microstructure of the concrete with FA and SL. Thus, the adverse effects of steam curing on later strength and durability of concrete are significantly restrained by composite mineral admixtures of FA and SL.

Effects of stream curing on the pore structure of recycled aggregate concrete

Effect of steam curing system on compressive strength of recycled aggregate concrete

Effect of Forepart Strength of Cured-concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Steel Corrosion and Corrosion-Induced Cracking in Reinforced Concrete with Carbonated Recycled Aggregate

Influence of Construction Conditions on Properties of Recycled Concrete

Effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures

Effect of Curing Regime on the Mechanical Properties and Durability of Steam Cured-Concrete

Effect of Steam Curing on Performance of Low Quality Reclaimed Fine Aggregate Concrete

Effects of Manufactured Sand and Steam-Curing Temperature on the Compressive Strength of Recycled Concrete with Different Water/Binder Ratios

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Influence of High-Volume Mineral Mixtures and the Steam-Curing Temperatures on the Properties of Precast Concrete

Influence of Steam Curing Method on the Performance of Concrete Containing a Large Portion of Mineral Admixtures

Unlocking the Role of Recycled Aggregates in the Performance Enhancement and CO2 Capture of Reactive Magnesia Cement Formulations

Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete

Influence of cement and aggregate type on steam-cured concrete – an experimental study

Effect of Curing Regime on the Mechanical Strength, Hydration, and Microstructure of Ecological Ultrahigh-Performance Concrete (EUHPC)

Effect of curing conditions on the alkali-activated blends: Microstructure, performance and economic assessment

Effect of Steam Curing System on Pore Structure of Cement Paste

Investigating the Impact of Fly Ash on the Strength and Micro-Structure of Concrete during Steam Curing and Subsequent Stages

Effects of CO 2 curing methods on frost resistance and mechanical properties of recycled aggregate concrete