Abstract:As we know, 3DPC is printed layer by layer compared with mold-casting conventional concrete. Pore structure and layer-to-layer interface are two main aspects of the internal structure for 3DPC, which decide 3DPC's mechanical performance. The layer-to-layer interface caused by printing is specific to 3DPC. The emphasis of this study lies in the layer-to-layer interfaces of 3DPC. The first aim of this study is to quantify the characteristics of the layer-to-layer interface and therefore characterize different aspects of the interfaces. The second aim of this study is to explore how the internal structure of printed concrete influences the mechanical performance of 3DPC. This research set out to design a series of experimental comparisons between 3DPC and casted concrete with the same compositions. Mechanical tests, i.e., compressive stress, ultrasonic Pulse Velocity test, flexural tension, and tension splitting, as well as the Ultrasonic Pulse Velocity test, were performed to check the mechanical performance of 3DPC. Contrary to what has often been expected, the mechanical test results showed the printed concrete has a quality not worse than casted concrete with the same recipe. Meanwhile, the X-ray computed tomography (X-CT) is used to characterize the internal structure, pore shapes, and interfaces of 3DPC. First, the investigation revealed that the lower total porosity and fewer big voids could be the fundamental causes meaning 3DPC has a better mechanical performance than casted concrete. Second, the statistics based on aspect ratio show that the distribution curves follow similar trends, regardless of the printed or casted concrete. Third, this study quantified the depth of the different interfaces for 3DPC. The results suggest that the porosity in an interface varies in a range. The author's pioneer work has contributed to our present understanding of the interfaces of 3DPC.

Study on the Permeability Characteristics of Foamed Concrete Using a Pore-Scale Model from X-Ray Microcomputed Tomography Image Reconstruction and Numerical Simulation

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Numerical Study on Seepage Flow in Pervious Concrete Based on 3D CT Imaging

Numerical Study on Permeability and Mechanical Property of Pervious Concrete

Micromechanical Modeling on Compressive Behavior of Foamed Concrete

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

2D and 3D homogenization and fracture analysis of concrete based on in-situ X-ray Computed Tomography images and Monte Carlo simulations

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

A Mesoscale Three-Dimensional Moisture Transport Model in Concrete

Multi-scale flow, permeability, and heat transport in low-carbon and traditional building materials

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

A Novel Method to Predict the Mesostructure and Performance of Pervious Concrete

Size effect on compressive strength of foamed concrete: Experimental and numerical studies

Improved Predictions of Permeability Properties in Cement-Based Materials: A Comparative Study of Pore Size Distribution-Based Models

Experimental Study and Modelling on Saturated Coefficient of Permeability of A Geofoam

Two-Dimensional Microstructure-Based Model for Evaluating the Permeability Coefficient of Heterogeneous Construction Materials

Determining the fracture properties of pervious concrete specimens with various micro-structures and geometries

Conductivity and permeability of graphite foams: Analytical modelling and pore-scale simulation

Permeability of porous foamy materials

A New Analytical Method to Predict Permeability Properties of Cementitious Mortars: the Impacts of Pore Structure Evolutions and Relative Humidity Variations

Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis