Abstract:Organic electroluminescence is one of the most promising technology for next generation of flat panel display. Hole transporting layer represents the weakest link in the electroluminescent structure considering the thermal stability of the materials. The most widely used hole transporting material, N,N'-bis (1-naphthyl)-N, N'-diphenyl-1, 1'-biphenyl-4, 4'-diamine (NPB), has a glass transition temperature ( Tg) of 95℃, which is much lower than that of the electron transporting material, tris (8- hydroxyquinoline) aluminum (Alq3) . Based on the good hole transporting property and suitable energy level matched with other materials of NPB, two new hole transporting materials: N, N'-bis(1-naphthyl)- N,N'-di(4-methylphenyl)-1,1'-biphenyl-4, 4'-diamine (NTB) and N, N'-bis(1-naphthyl)-N, N'-di(4- tert-butylphenyl)-1, 1'-biphenyl-4, 4'-diamine (NBB) were synthesized by introducing methyl and tert- butyl groups into NPB to improve its thermal stability. The glass transition temperature (Tg) of NTB and NBB measured by DSC are 108℃ and 129℃ respectively, showing better thermal stability than that of NPB. The ionization energy obtained by ultraviolet photoemission spectroscopy is 5. 2eV for all of NPB and its derivatives. The emission peak in the photoluminescent spectra of the solid films of NTB and NBB are at 455nm and 460nm, which are close to the emission peak of NPB at 440nm. The organic electroluminescent devices using NPB, NTB and NBB as hole transporting layer (HTM) were fabricated with the structure of ITO/CuPc(20nm)/HTM(50nm)/Alq3(60nm)/LiF(0.5nm)/Al(100nm). The emission spectra of the three devices are the same and the green color light was emitted from the Alq3 layer. The turn-on voltages of the devices are 11, 9, 8V for NPB, NTB and NBB, respectively. The brightness of the devices at 15V are 1 000, 1 300, 1 200cd/m2 for NPB, NTB and NBB. The devices with NTB and NBB also show better longevity than that of NPB in a prelimin ary test.

Organic alternating current electroluminescence device based on 4,4′-bis(N-phenyl-1-naphthylamino) biphenyl/1,4,5,8,9,11-hexaazatriphenylene charge generation unit

Study of Organic Electrolumenescent Thin Film Cell

Efficient Organic Electroluminescent Devices Based on an Organosamarium Complex

Greenish-yellow electroluminescent devices using a novel dihydroquinazolinone derivative as emitting layer

Efficient White Light-Emitting Organic/Polymeric Electroluminescent Device

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure

A green top-emitting organic light-emitting device with improved luminance and efficiency

Organic single-quantum-well electroluminescent device

High-performance Blue Electroluminescent Devices Based on 2-(4-Biphenylyl)-5-(4-carbazole-9-yl)phenyl-1,3,4-oxadiazole.

An Efficient Blue Organic Light Emitting Structure

High Contrast Organic Light-Emitting Devices with Improved Electrical Characteristics

Emission Characteristics Of Organic Light-Emitting Diodes With A Heterostructure Of Dye Doped Poly(N-Vinyl Carbazole)/Tris(8-Hydroxyquinoline) Aluminum

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices

Efficient inverted organic light-emitting devices using a charge-generation unit as electron-injection layers

Green Phosphorescent Tandem Organic Light-emitting Diodes Based on Organic Heterojunction of C60/ZnPc

Organic Electroluminescent Device Based on Balanced Carriers Injection and Transportation

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Alternating Current‐Driven Oxide‐Powder Electroluminescent Device Employing Vertically Aligned ZnO Nanowire Array

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Highly efficient and bright doped organic electroluminescent diodes using an aluminum electrode