Abstract:Nanocrystalline BiFeO3 was synthesized utilizing two distinct techniques: auto-combustion and ceramic. A unique auto-combustion process employing glycine as a fuel has been used to synthesize single-phase BiFeO3 nanoparticles. Well mixed metal nitrates combust, producing BiFeO3 nanoparticles, which crystallize in a rhombohedral perovskite structure. The average particle size of 16 nm was estimated using Rietveld refinement of the X-ray diffraction data. The X-ray diffraction data for the solid-state prepared sample shows the formation of BiFeO3 with the same rhombohedral perovskite structure with an average particle size of 101 nm with additional secondary phases corresponding to Bi2Fe4O9/Bi2O3 and Bi25FeO39. By increasing the sintering time Bi2Fe4O9/Bi2O3 phase disappeared after 3 h of heating and reappeared again after 5 h of sintering. The changing of sintering time was not able to reduce the Bi25FeO39 formation. The TEM estimated average particle size confirms the XRD analysis. M(H) hysteresis loop shows a G-type magnetic structure. Due to the small particle size, the periodicity of canted spins was broken, and the magnetization of the auto-combustion prepared sample is approximately eight times greater than the ceramic prepared one. The importance of pure phase BiFeO3 came from its potential applications in sensors, data storage, spintronics devices, and reports of greatly enhanced ferroelectricity in epitaxially strained thin films.

Synthesis of Multiferroic BiFeO3 Powders by Sol-Gel Auto-Combustion

Synthesis of BiFeO3-PbTiO3 powders by sol-gel auto-combustion process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

Auto-combustion synthesis of nanocrystalline LaFeO3

Synthesis of nanocrystalline NiCuZn ferrite powders by sol–gel auto-combustion method

Synthesis of Nanocrystalline LaFeO3 by Sol-gel Auto- combustion Method

The Characterization and Preparation of Nano Scale Fe Doping TiO2 by Sol Gel Method? the Crystallization and Thermal Decomposition Process of Fe Doping TiO2 Xerogel Powders Using Thermal TG IR Spectrometry

Comparison on the crystallization characteristics of sol–gel derived (BiDy)3Fe5O12 garnet film and powder

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

SYNTHESIS OF NANOCRYSTALLINE Mn_(0.6)Cu_(0.2)Zn_(0.2)O(Fe_2O_3)_(0.98) FERRITE BY SOL-GEL AUTO-COMBUSTION METHOD AND CHARACTERIZATION OF ITS MAGNETIC PROPERTIES

Synthesis of nanocrystilline ferrites by sol–gel combustion process: the influence of pH value of solution

A Simple Way to Prepare Nanosized LaFeO 3 Powders at Room Temperature

One-pot Self-Catalyzed Synthesis and Properties of Multiferroic BiFeO3 Single-Phase Crystallites by Sucrose-Assisted Combustion

Room Temperature Preparation of Nanocrystalline MnCuZn Ferrite Powder by Auto-Combustion of Nitrate-Citrate Gels

Multiferroic Bifeo3 Thin Films Prepared Via A Simple Sol-Gel Method

Synthesis of Sr2FeMoO6-δ Powders by Sol-gel Citric Acid Combustion Method

Preparation and characterization of NiCuZn ferrite nanocrystalline powders by auto-combustion of nitrate–citrate gels

Microstructural, Optical and Magnetic Characterizations of BiFeO3 Multiferroic Nanoparticles Synthesized Via a Sol-Gel Process

Influence of preparation method on phase formation, structural and magnetic properties of BiFeO3

Synthesis of Multiferroic BiFeO3 Powders by Sol-Gel Auto-Combustion

Synthesis of BiFeO3-PbTiO3 powders by sol-gel auto-combustion process

Synthesis of BiFeO&lt;sub&gt;3&lt;/sub&gt;-PbTiO&lt;sub&gt;3&lt;/sub&gt; Powders by Sol-Gel Auto-Combustion Process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

Auto-combustion synthesis of nanocrystalline LaFeO3

Synthesis of nanocrystalline NiCuZn ferrite powders by sol–gel auto-combustion method

Synthesis of Nanocrystalline LaFeO3 by Sol-gel Auto- combustion Method

The Characterization and Preparation of Nano Scale Fe Doping TiO2 by Sol Gel Method? the Crystallization and Thermal Decomposition Process of Fe Doping TiO2 Xerogel Powders Using Thermal TG IR Spectrometry

Comparison on the crystallization characteristics of sol–gel derived (BiDy)3Fe5O12 garnet film and powder

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

SYNTHESIS OF NANOCRYSTALLINE Mn_(0.6)Cu_(0.2)Zn_(0.2)O(Fe_2O_3)_(0.98) FERRITE BY SOL-GEL AUTO-COMBUSTION METHOD AND CHARACTERIZATION OF ITS MAGNETIC PROPERTIES

Synthesis of nanocrystilline ferrites by sol–gel combustion process: the influence of pH value of solution

A Simple Way to Prepare Nanosized LaFeO 3 Powders at Room Temperature

One-pot Self-Catalyzed Synthesis and Properties of Multiferroic BiFeO3 Single-Phase Crystallites by Sucrose-Assisted Combustion

Room Temperature Preparation of Nanocrystalline MnCuZn Ferrite Powder by Auto-Combustion of Nitrate-Citrate Gels

Multiferroic Bifeo3 Thin Films Prepared Via A Simple Sol-Gel Method

Synthesis of Sr2FeMoO6-δ Powders by Sol-gel Citric Acid Combustion Method

Preparation and characterization of NiCuZn ferrite nanocrystalline powders by auto-combustion of nitrate–citrate gels

Microstructural, Optical and Magnetic Characterizations of BiFeO3 Multiferroic Nanoparticles Synthesized Via a Sol-Gel Process

Influence of preparation method on phase formation, structural and magnetic properties of BiFeO3

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process