Abstract:A nanostructure of lithium-zinc copper ferrite (LiZnCu-Ferrite) prepared experimentally by the auto-combustion method depends on different parameters. The auto-combustion method operates at a temperature (160 °C) suitable for preparing the required nanostructure ferrite phase. The dependent composition was [Li0.5-xZnxCuxFe2.5-xO4 at (x = 0, 0.05, 0.15, 0.25, 0.35, and 0.45)]. A pre-firing at temperature (650 °C) was applied during the calcination process that was suitable to remove unwanted products. The sintering at temperature (800 °C) was suitable for a pelletized shape of ferrite samples. The X-ray diffraction (XRD) pattern showed a spinel structure of ferrite phase produced for all samples under study with the lattice constant in the range (8.345–8.368 Å) as a function of (x). The crystallite size was in the range (18.41–30.27 nm) calculated by the Scherrer method. The transmission electron microscope (TEM) showed a production of nanorods in the size range (10–45 nm) and nanoparticles in the size range (10–40 nm). There was a coincidence between the results of the XRD and TEM analyses. On the other hand, the scanning electron microscope (SEM) showed the surface morphology and the nature of grain size, which was a sign of the presence of nanostructure; it agreed with the XRD analysis. FTIR spectra showed evidence that the system Li0.5-xZnxCuxFe2.5-xO4 had spinal ferrite nanoparticles successfully prepared by sol-gel auto-combustion. A vibrating sample magnetometer (VSM) showed a change in magnetic parameters as compensation factor (x) increased for all composites of LiZnCu-ferrite such as saturation magnetization (Ms), initial magnetic permeability (μi), remanence (Mr), and coercive force (Hc) that measured from M − H loops. A saturation magnetization increased as a function of (x) and recorded a maximum value at (x = 0.15). While the coercivity, initial magnetic permeability (μi), and remanence magnetization enhanced as a function of (x) and recorded a maximum value at (x = 0.45).

Auto-combustion synthesis of nanocrystalline LaFeO3

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Synthesis of Nanocrystalline LaFeO3 by Sol-gel Auto- combustion Method

A Simple Way to Prepare Nanosized LaFeO 3 Powders at Room Temperature

Synthesis of nanocrystalline NiCuZn ferrite powders by sol–gel auto-combustion method

Structural and magnetic characterization of nanocrystalline LaFeO 3 synthesized by low temperature combustion technique using different fuels

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

SYNTHESIS OF NANOCRYSTALLINE Mn_(0.6)Cu_(0.2)Zn_(0.2)O(Fe_2O_3)_(0.98) FERRITE BY SOL-GEL AUTO-COMBUSTION METHOD AND CHARACTERIZATION OF ITS MAGNETIC PROPERTIES

Room Temperature Preparation of Nanocrystalline MnCuZn Ferrite Powder by Auto-Combustion of Nitrate-Citrate Gels

Sonochemical synthesis of nanocrystalline LaFeO3

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

Preparation, Characterization and Optical Property of LaFeO3 Nanoparticles via Sol-Gel Combustion Method

Sol gel auto combustion method to prepare nanostructures LiZnCu ferrite

Facile Autocombustion Synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite Via a Modified Complexing Sol–gel Process with NH4NO3 As Combustion Aid

Synthesis of nanocrystilline ferrites by sol–gel combustion process: the influence of pH value of solution

Synthesis of BiFeO3-PbTiO3 powders by sol-gel auto-combustion process

Preparation and characterization of NiCuZn ferrite nanocrystalline powders by auto-combustion of nitrate–citrate gels

Effect of Precursor Solutions with Different Composition on Synthesis of Ultrafine BaLa0.3Fe11.7O19using Sol-Gel Auto-Combustion Technique

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Preparation and magnetic properties of titanium-substituted LiZn ferrites via a sol-gel auto-combustion process

Auto-combustion synthesis of nanocrystalline LaFeO3

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Synthesis of Nanocrystalline LaFeO3 by Sol-gel Auto- combustion Method

A Simple Way to Prepare Nanosized LaFeO 3 Powders at Room Temperature

Synthesis of nanocrystalline NiCuZn ferrite powders by sol–gel auto-combustion method

Structural and magnetic characterization of nanocrystalline LaFeO 3 synthesized by low temperature combustion technique using different fuels

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

SYNTHESIS OF NANOCRYSTALLINE Mn_(0.6)Cu_(0.2)Zn_(0.2)O(Fe_2O_3)_(0.98) FERRITE BY SOL-GEL AUTO-COMBUSTION METHOD AND CHARACTERIZATION OF ITS MAGNETIC PROPERTIES

Room Temperature Preparation of Nanocrystalline MnCuZn Ferrite Powder by Auto-Combustion of Nitrate-Citrate Gels

Sonochemical synthesis of nanocrystalline LaFeO3

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

Preparation, Characterization and Optical Property of LaFeO3 Nanoparticles via Sol-Gel Combustion Method

Sol gel auto combustion method to prepare nanostructures LiZnCu ferrite

Facile Autocombustion Synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite Via a Modified Complexing Sol–gel Process with NH4NO3 As Combustion Aid

Synthesis of nanocrystilline ferrites by sol–gel combustion process: the influence of pH value of solution

Synthesis of BiFeO3-PbTiO3 powders by sol-gel auto-combustion process

Preparation and characterization of NiCuZn ferrite nanocrystalline powders by auto-combustion of nitrate–citrate gels

Effect of Precursor Solutions with Different Composition on Synthesis of Ultrafine BaLa0.3Fe11.7O19using Sol-Gel Auto-Combustion Technique

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of BiFeO&lt;sub&gt;3&lt;/sub&gt;-PbTiO&lt;sub&gt;3&lt;/sub&gt; Powders by Sol-Gel Auto-Combustion Process

Preparation and magnetic properties of titanium-substituted LiZn ferrites via a sol-gel auto-combustion process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process