Abstract:The effect of microwave radiation on the hydrothermal synthesis of the double perovskite Sr2FeMoO6 has been studied based on a comparison of the particle size and structural characteristics of products from both methods. A temperature, pressure, and pH condition screening was performed, and the most representative results of these are herein presented and discussed. Radiation of microwaves in the hydrothermal synthesis method led to a decrease in crystallite size, which is an effect from the reaction temperature. The particle size ranged from 378 to 318 nm when pH was 4.5 and pressure was kept under 40 bars. According to X-ray diffraction (XRD) results coupled with the size-strain plot method, the product obtained by both synthesis methods (with and without microwave radiation) have similar crystal purity. The Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) techniques showed that the morphology and the distribution of metal ions are uniform. The Curie temperature obtained by thermogravimetric analysis indicates that, in the presence of microwaves, the value was higher with respect to traditional synthesis from 335 K to 342.5 K. Consequently, microwave radiation enhances the diffusion and nucleation process of ionic precursors during the synthesis, which promotes a uniform heating in the reaction mixture leading to a reduction in the particle size, but keeping good crystallinity of the double perovskite. Precursor phases and the final purity of the Sr2FeMoO6 powder can be controlled via hydrothermal microwave heating on the first stages of the Sol-Gel method.

Synthesis of Sr2FeMoO6-δ Powders by Sol-gel Citric Acid Combustion Method

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

PREPARATION OF Sr2Fe1-xMnxMoO6-δ NANO-POWDERS FOR THE CATHODE OF SOLID OXIDE ELECTROLYSIS CELLS

Synthesis of SmBaCo2O6−δ powder by the combustion process using Co3O4 as precursor

Preparation of Sr 2Fe 1-xSc xMoO 6-δ nanopowders and its electrical conductivity

Structural Analysis for Preparing Substituted Sr Hexaferrite Nanoparticles by Sol-gel Method

Synthesis and crystal structure of double-perovskite compound Sr2FeMoO6

Synthesis and Characterization of Pr_(0.6)Sr_(0.4)FeO_(3-δ) with Perovskite Phases

Synthesis and crystal structure of double-perovskite compound Sr<sub>2</sub>FeMoO<sub>6</sub>

Synthesis of Sr 2Fe 1-xMn xNbO 6-δ powders and their stability as electrode of solid oxide electrolysis cell

Synthesis of BiFeO3-PbTiO3 powders by sol-gel auto-combustion process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of Sr<sub>2</sub>Fe<sub>1-x</sub>Mn<sub>x</sub>NbO<sub>6-δ</sub> Powders and Their Stability As Electrode of Solid Oxide Electrolysis Cell

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Preparation of La_(1-x)Sr_xCoO_(3-δ) Conductive Ceramics by Sol-gel Method

Preparation and characterization of SrFeCo0.5O3.25+δ by gelcasting

Sol-Gel Synthesis of the Double Perovskite Sr2FeMoO6 by Microwave Technique

Preparation and Properties of Perovskite La1-xSrxCoO3-delta Powders and Ag-LSCO Electrical Contact Composite Materials

Characteristics of SrCo1-xFexO3-δPerovskite Powders with Improved O2/CO2Production Performance for Oxyfuel Combustion

Facile Autocombustion Synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite Via a Modified Complexing Sol–gel Process with NH4NO3 As Combustion Aid

Synthesis of Sr2FeMoO6-δ Powders by Sol-gel Citric Acid Combustion Method

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Preparation of Double-Perovskites Sr&lt;sub&gt;2&lt;/sub&gt;Fe&lt;sub&gt;1-x&lt;/sub&gt;Sc&lt;sub&gt;x&lt;/sub&gt;MoO&lt;sub&gt;6-δ&lt;/sub&gt; Powders for the Cathode of SOEC by Sol-Gel Citrate Method

PREPARATION OF Sr2Fe1-xMnxMoO6-δ NANO-POWDERS FOR THE CATHODE OF SOLID OXIDE ELECTROLYSIS CELLS

Synthesis of SmBaCo2O6−δ powder by the combustion process using Co3O4 as precursor

Preparation of Sr 2Fe 1-xSc xMoO 6-δ nanopowders and its electrical conductivity

Structural Analysis for Preparing Substituted Sr Hexaferrite Nanoparticles by Sol-gel Method

Synthesis and crystal structure of double-perovskite compound Sr2FeMoO6

Synthesis and Characterization of Pr_(0.6)Sr_(0.4)FeO_(3-δ) with Perovskite Phases

Synthesis and crystal structure of double-perovskite compound Sr<sub>2</sub>FeMoO<sub>6</sub>

Synthesis of Sr 2Fe 1-xMn xNbO 6-δ powders and their stability as electrode of solid oxide electrolysis cell

Synthesis of BiFeO3-PbTiO3 powders by sol-gel auto-combustion process

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process

Synthesis of Sr&lt;sub&gt;2&lt;/sub&gt;Fe&lt;sub&gt;1-x&lt;/sub&gt;Mn&lt;sub&gt;x&lt;/sub&gt;NbO&lt;sub&gt;6-δ&lt;/sub&gt; Powders and Their Stability As Electrode of Solid Oxide Electrolysis Cell

Synthesis of BiFeO&lt;sub&gt;3&lt;/sub&gt;-PbTiO&lt;sub&gt;3&lt;/sub&gt; Powders by Sol-Gel Auto-Combustion Process

Preparation of La_(1-x)Sr_xCoO_(3-δ) Conductive Ceramics by Sol-gel Method

Preparation and characterization of SrFeCo0.5O3.25+δ by gelcasting

Sol-Gel Synthesis of the Double Perovskite Sr2FeMoO6 by Microwave Technique

Preparation and Properties of Perovskite La1-xSrxCoO3-delta Powders and Ag-LSCO Electrical Contact Composite Materials

Characteristics of SrCo1-xFexO3-δPerovskite Powders with Improved O2/CO2Production Performance for Oxyfuel Combustion

Facile Autocombustion Synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite Via a Modified Complexing Sol–gel Process with NH4NO3 As Combustion Aid

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Synthesis of Sr<sub>2</sub>Fe<sub>1-x</sub>Mn<sub>x</sub>NbO<sub>6-δ</sub> Powders and Their Stability As Electrode of Solid Oxide Electrolysis Cell

Synthesis of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Powders by Sol-Gel Auto-Combustion Process