Abstract:This work presents the structural and electrical characterization of K2NiF4-type layered perovskites of LaSrAl1-xMgxO4-δ composition to be used as oxide-ion electrolytes for a solid-oxide fuel cell (SOFC). These perovskites were prepared by mechano-chemical synthesis (ball milling), an alternative to traditional synthesis methods such as citrate-nitrates and solid-state reaction. With these methods, two things are avoided: first, the use of nitrate salts, which are more environmentally harmful than oxide precursors, and second, it saves the series of long thermal treatments associated with solid-state reactions. After grinding the precursors, nanometric particles were obtained with a combination of crystalline regions and amorphous regions; this effect was determined by XRD and TEM, showing that Mg has a positive effect on the phase formation by only mechanical synthesis. R2C4: After sintering, it was found by XRD that the sample x = 0.1 only presents the diffraction peaks corresponding to the desired phase, which shows a phase purity greater than 97%, even higher than that of the standard undoped sample. For x = 0.2 and 0.3, there was a segregation of impurities, possibly by the local migration of La and Sr heavy cations; this was determined by SEM and EDS. The electrical characterization of the sintered pellets was carried out by electrochemical impedance spectroscopy, which determined that the incorporation of Mg in the structure improves the ionic conductivity by three orders of magnitude, obtaining conductivities of 1.6 mS/cm at 900 °C for x = 0.2. Although the improvement in conductivity is considerable, many challenges such as densification, the segregation of impurities, and the study of mechanical and thermal properties must be carried out on these materials to endorse them as solid electrolytes in SOFC.

Synthesis of Sr 2Fe 1-xMn xNbO 6-δ powders and their stability as electrode of solid oxide electrolysis cell

Synthesis of Sr<sub>2</sub>Fe<sub>1-x</sub>Mn<sub>x</sub>NbO<sub>6-δ</sub> Powders and Their Stability As Electrode of Solid Oxide Electrolysis Cell

PREPARATION OF Sr2Fe1-xMnxMoO6-δ NANO-POWDERS FOR THE CATHODE OF SOLID OXIDE ELECTROLYSIS CELLS

Bismuth Doped Sr2Fe1.5Mo0.5O6-δ Double Perovskite As a Robust Fuel Electrode in Ceramic Oxide Cells for Direct CO2 Electrolysis

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Preparation of Sr 2Fe 1-xSc xMoO 6-δ nanopowders and its electrical conductivity

Preparation of Sr2FexMn1 xNbO6 delta YSZ/YSZ/Sr2FexMn1 xNbO6 delta YSZ Symmetric SOEC by Tape Casting and Its Performances

Electrochemical Evaluation of Double Perovskite PrBaCo2-xMnxO5+δ (x = 0, 0.5, 1) As Promising Cathodes for IT-SOFCs

Microstructure and Properties of Sr2FeMoO6 delta as Cathode Materials for SOEC

Preparation and Performance of Sr3Fe2-xNixO7-delta (x=0, 0.1, 0.2, 0.3) Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Cobalt-free SrNbxFe1−xO3−δ (x = 0.05, 0.1 and 0.2) Perovskite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Structural and Electrical Characterization of LaSrAl1-xMgxO4-δ Layered Perovskites Obtained by Mechanical Synthesis

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Tuning the Phase Transition of SrFeO3-δ by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Structural properties and electrical conductivity of perovskite-type oxides in SOFCs

Tuning the Phase Transition of SrFeO3-delta by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Highly active and stable Er0.4Bi1.6O3 decorated La0.76Sr0.19MnO3+δ nanostructured oxygen electrodes for reversible solid oxide cells

Synthesis and Characterization of SmSrCo2−xMnxO5+δ (x=0.0, 0.2, 0.4, 0.6, 0.8, 1.0) Cathode Materials for Intermediate-Temperature Solid-Oxide Fuel Cells

Synthesis of Sr 2Fe 1-xMn xNbO 6-δ powders and their stability as electrode of solid oxide electrolysis cell

Synthesis of Sr&lt;sub&gt;2&lt;/sub&gt;Fe&lt;sub&gt;1-x&lt;/sub&gt;Mn&lt;sub&gt;x&lt;/sub&gt;NbO&lt;sub&gt;6-δ&lt;/sub&gt; Powders and Their Stability As Electrode of Solid Oxide Electrolysis Cell

PREPARATION OF Sr2Fe1-xMnxMoO6-δ NANO-POWDERS FOR THE CATHODE OF SOLID OXIDE ELECTROLYSIS CELLS

Bismuth Doped Sr2Fe1.5Mo0.5O6-δ Double Perovskite As a Robust Fuel Electrode in Ceramic Oxide Cells for Direct CO2 Electrolysis

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Preparation of Sr 2Fe 1-xSc xMoO 6-δ nanopowders and its electrical conductivity

Preparation of Sr2FexMn1 xNbO6 delta YSZ/YSZ/Sr2FexMn1 xNbO6 delta YSZ Symmetric SOEC by Tape Casting and Its Performances

Electrochemical Evaluation of Double Perovskite PrBaCo2-xMnxO5+δ (x = 0, 0.5, 1) As Promising Cathodes for IT-SOFCs

Microstructure and Properties of Sr2FeMoO6 delta as Cathode Materials for SOEC

Preparation and Performance of Sr3Fe2-xNixO7-delta (x=0, 0.1, 0.2, 0.3) Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Cobalt-free SrNbxFe1−xO3−δ (x = 0.05, 0.1 and 0.2) Perovskite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Structural and Electrical Characterization of LaSrAl1-xMgxO4-δ Layered Perovskites Obtained by Mechanical Synthesis

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Preparation of Double-Perovskites Sr&lt;sub&gt;2&lt;/sub&gt;Fe&lt;sub&gt;1-x&lt;/sub&gt;Sc&lt;sub&gt;x&lt;/sub&gt;MoO&lt;sub&gt;6-δ&lt;/sub&gt; Powders for the Cathode of SOEC by Sol-Gel Citrate Method

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Tuning the Phase Transition of SrFeO3-δ by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Structural properties and electrical conductivity of perovskite-type oxides in SOFCs

Tuning the Phase Transition of SrFeO3-delta by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Highly active and stable Er0.4Bi1.6O3 decorated La0.76Sr0.19MnO3+δ nanostructured oxygen electrodes for reversible solid oxide cells

Synthesis and Characterization of SmSrCo2−xMnxO5+δ (x=0.0, 0.2, 0.4, 0.6, 0.8, 1.0) Cathode Materials for Intermediate-Temperature Solid-Oxide Fuel Cells

Synthesis of Sr<sub>2</sub>Fe<sub>1-x</sub>Mn<sub>x</sub>NbO<sub>6-δ</sub> Powders and Their Stability As Electrode of Solid Oxide Electrolysis Cell

Preparation of Double-Perovskites Sr<sub>2</sub>Fe<sub>1-x</sub>Sc<sub>x</sub>MoO<sub>6-δ</sub> Powders for the Cathode of SOEC by Sol-Gel Citrate Method