Abstract:Research on water quenched silicomanganese slag (WQSMS) has primarily focused on grinding it into micro-powder to be used as auxiliary cementitious materials or to synthesize alkali-activated cementitious materials. However, there is a lack of research on utilizing WQSMS as fine aggregates instead of natural aggregates. Although its properties are similar to granulated blast furnace slag (GBFS), most studies investigating the use of GBFS as fine aggregates have mainly focused on mechanical properties rather than microstructure analyses. Meanwhile, to make full use of industrial solid waste, reduce CO2 emissions, and save energy consumption, solid waste cementitious material based on steel slag (SS), desulphurized gypsum (DG), and GBFS, as well as WQSMS as fine aggregate to replace ISO standard sand and washed-out sand (WOS) in various proportions(0%, 25%, 50%, 75%, and 100%) to prepare mortar and concrete, respectively. Analyses of workability, mechanical properties, and microstructure were carried out, and the improvement of mechanical properties of WQSMS was analyzed by SEM-EDS, SEM-BSE, and the microhardness test. The results show that with the increase of WQSMS, the workability of mortar and concrete decreased, while the mechanical strength increased first and then decreased. The mechanical strengths of them reached the peak when the WQSMS addition reached 50%. The flexural and compressive strengths of the mortar increased by 40% and 9.7%, respectively, while the tensile splitting strength and compressive strength of the concrete increased by 11.9% and 3.4%, respectively. The microstructure of the interfacial transition zone(ITZ) was greatly enhanced by WQSMS, which decreased the porosity by 10.49%, decreased the thickness by 27.27%, and increased the microhardness by 11.0%. However, when the content surpasses 50%, the mechanical strength of mortar and concrete declined due to the loose porosity and poor mechanical strength of WQSMS, and there was insufficient cementitious material to fill these holes. Nonetheless, with 100% content, the mortar maintained its high-performance status, with a flexural strength of 8.0 MPa and a compressive strength of 47.9 MPa, and the concrete still fulfilled the specifications of regular concrete C40. Both the fine aggregate and the cementitious material were composed of solid waste, showing potential environmental benefits and interesting green products for future studies.

Research on Influences of Activity Mineral Admixture on Workability and Mechanical Properties of High Strength Lightweight Aggregate Concrete

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Effects of Fly Ash and Ground Granulated Blast-Furnaces Slag on Properties of High-Strength Concrete

Mechanical properties and microstructure of ultra-high strength concrete with lightweight aggregate

Mechanical properties of high strength semi-lightweight aggregate concrete containing high volume waste materials

Effect of air-cooled blast furnace slag aggregate on mechanical properties of ultra-high-performance concrete

Enhancement of ultra-fine slag on compressive strength of solid waste-based cementitious materials: Towards low carbon emissions

Experimental study on full-volume slag alkali-activated mortars: Air-cooled blast furnace slag versus machine-made sand as fine aggregates

Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

Mass GGBFS Concrete Mixed with Recycled Aggregates as Alkali-Active Substances: Workability, Temperature History and Strength

Effect of Fly Ash and Reactive MgO on the Engineering Properties and Durability of High-Performance Concrete Produced with Alkali-Activated Slag and Recycled Aggregate

Effect of water quenched silicomanganese slag as fine aggregate on mechanical properties and microstructure characteristics of solid waste-based mortar and concrete

Improving Corrosion Resistance and Prolonging the Service Life of High-performance Concrete Structures Using Fly Ash and Ground Granulated Blast-furnace Slag

Investigation of basic properties, microscopic characteristics, and optimized ratio prediction model of ultra-high steel fiber reinforced concrete

The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste

Mixture Design and Mechanical Properties of Recycled Mortar and Fully Recycled Aggregate Concrete Incorporated with Fly Ash

Study on the properties of alkali-activated phosphorus slag mortar mixed with granulated blast furnace slag/fly ash

Optimization of mechanical properties and pore structure of lightweight geopolymer concrete using GGBFS based on LF-NMR technology

Stuay of Mineral Admixtures as Fine Aggregate on Hydration Products and Spectral Performance of Mortar