Abstract:Excavation gaps around the front shield can be generated during shield construction, resulting in significant ground settlement. Traditional synchronous grouting slurries are unsuitable for filling these gaps during tunneling under existing subway lines. To address this issue, experiments are conducted on mix characteristics and hardening properties of slurries with variations in fineness and contents of fly ash. The experimental and computed tomography scan results yield the following findings: (1) fly ash with high fineness can effectively reduce the early strength of slurries and enhance their injectability. This improves the filling effect on micropores in the slurry and ultimately enhances the final hardening strength. (2) Fineness of fly ash controls the process of slurry hydration. The higher the fineness of fly ash, the more visible the exothermic hydration of slurry and the earlier the highest temperature peak appears. (3) Fly ash with high fineness can effectively increase the density and consolidation rate of slurries, resulting in greater improvement in slurry strength, particularly when the ratio of fly ash to cement (mf/mc) is 0.75. (4) Fly ash with high fineness can effectively decrease the likelihood of appearance of pores in the slurry, optimize the pore structure, and enhance the strength of slurries after consolidation. The fineness and amount of fly ash particles will affect the physical and chemical properties of the slurry, especially the shear strength and hardness of the slurry after hardening, and will also affect the hydration process of the slurry, which will change the microscopic porosity of the slurry. image Adjusting the fineness and content of fly ash can control the hydration process and properties of fly ash slurry, including coagulation, strength development, and pore distribution uniformity, thereby optimizing construction efficiency and environmental performance.

Effects of Fly Ash and Ground Granulated Blast-Furnaces Slag on Properties of High-Strength Concrete

Activation and Toxicity of Slag-fly Ash-fluorgypsum Cementitious Material

Experimental study on the compressive strength and shrinkage of concrete containing fly ash and ground granulated blast‐furnace slag

Effect of ground granulated blast furnace slag on the properties of hybrid‐fiber‐reinforced high‐strength concrete under normal and high temperatures

Improving Corrosion Resistance and Prolonging the Service Life of High-performance Concrete Structures Using Fly Ash and Ground Granulated Blast-furnace Slag

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Mechanical Properties and Durability of High-Performance Concretes Blended with Circulating Fluidized Bed Combustion Ash and Slag as Replacement for Ordinary Portland Cement

Synergetic Effect of Fly Ash and Ground-Granulated Blast Slag on Improving the Chloride Permeability and Freeze–thaw Resistance of Recycled Aggregate Concrete

Effect of blended steel slag–GBFS mineral admixture on hydration and strength of cement

Effect of Carbon Fiber on Mechanical Properties and Dimensional Stability of Concrete Incorporated with Granulated-Blast Furnace Slag

Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber

Effects of GGBS sand on the compressive strength and splitting tensile strength of concrete

Properties of High-Content Micro-Steel Fiber Self-Compacting Concrete Incorporating Fly Ash and Slag Powder Performance Study

Flexural properties after exposure to elevated temperatures of a ground granulated blast furnace slag concrete incorporating steel fibers and polypropylene fibers

Effect of decarbonization of high carbon fly ash on workability, mechanical properties and durability of concrete

Mechanical Properties of HPC Incorporating Fly Ash and Ground Granulated Blast Furnace Slag After Exposure to High Temperatures

The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste

Experimental Study on the Influence of Content and Fineness of Fly Ash on the Mechanical Properties of Grouting Slurries

Effects of Blended Steel Slag-Superfine Fly Ash Mineral Admixture and Ordinary Fly Ash on the Properties of Concrete

Strength properties of concrete incorporating coal bottom ash and granulated blast furnace slag

Activation of Blast Furnace Slag with CFB Fly Ash as a Supplementary Binder Material: Hydration Products and Effects of Sulfate Attack