Abstract:Experiments on the fatigue crack growth have shown great dispersancy. Study on stochastic crack growth of material at room temperature has been widely performed. However, probabilistic model for crack growth at fatigue-creep has been little investigated due to the complexity of the deterministic model for crack growth at fatigue-creep as well as the time-consuming and the difficulty of the experiments.Traditional crack measurement such as direct current and alternating current electrical potential technique, compliance method is limited for circuit interference at large crack, especially when the temperature is higher than 500 degrees C. Experimental system to achieve real-time FCCG detection at high temperature is established by introducing a long-distance microscope with high magnification and resolution from distances of 15cm to 35cm. The experimental setup consists of a dynamic testing machine, a machine controller, a temperature controlled box, a long-distance microscope and a high temperature furnace from room temperature to 1000 degrees C.Then the fatigue-creep crack growth (FCCG) rate tests on thirty compact tension (CT) specimens made of GH4133B material at 600 degrees C are carried out. The reason for choosing the GH4133B Ni-based superalloy is owing to its popularity in use for the turbine disc of the aero-engine. The tests are conducted on a 100KN capacity servo-hydraulic closed-loop machine employed trapezoidal load with hold time at upon peak load.Based on the crack growth models used for room temperature, the deterministic model for FCCG rate considering the parameters including temperature, hold time is established through comparison of the analytical results with the experimental data. Then the stochastic FCCG model for GH4133B is proposed and the probability of random to reach a specified crack size can be obtained as well as the distribution function of crack size at the service time. Through comparison between the analytical and experimental results, it's found that the probabilistic FCCG model can fit the experimental data well. Once the stochastic FCCG model is established, it can be used for the probabilistic damage tolerance design of the turbine components made of GH4133B material.

Determination of Creep Crack Growth Threshold by Experiments under Elevated Temperature with Pre-Stressed Specimens

Development of Tensile and Creep Properties for FGH95 Little Notched Specimens at High Temperature

Experimental Investigation of Creep Crack Growth Behavior in Nickel Base Superally by Constant Displacement Loading Method at Elevated Temperature

Experimental Method for Creep Crack Growth Testing in Controlled Environments at High Temperatures

Influence of Notch on Creep Properties of GH3536 Nickel-Based Superalloy

Fracture Behaviour of Compact Tension Specimens of Nickel-based Single Crystal Under Tension Creep and Cyclic Loading

Fatigue Crack Growth Measurement in a Superalloy at Elevated Temperature

Creep Behaviors of Nickel-Based Single Crystal Superalloys Compact Tension Specimen at High Temperature

Judgment Criterion of the Dominant Factor of Creep-Fatigue Crack Growth in a Nickel-Based Superalloy at Elevated Temperature

Study on the Creep Property by Small Beam Specimen With Fixed Constraints

A Concise Binomial Model for Nonlinear Creep-Fatigue Crack Growth Behavior at Elevated Temperatures

Based on Damage Caused by Microstructure Evolution During Long-Term Thermal Exposure to Analyze and Predict Creep Behavior of Ni-based Single Crystal Superalloy

A Unified Creep Life Prediction Method and Fracture Mechanism of High-Temperature Alloys under Multiaxial Stress

Crack Growth in Rotor P2M Steel at Elevated Temperature

Creep crack growth of GH3535 alloy at elevated temperatures

Creep damage and crack initiation behaviour of nickel-base single crystalline superalloys compact tension specimen with a void ahead of crack tip

Evaluating the Critical Temperature of Creep-Fatigue Interaction a Nickel-Based Powder Metallurgy Superalloy

Creep–fatigue Crack Growth Behaviour of a Nickel-Based Powder Metallurgy Superalloy under High Temperature

Crack growth behaviour of a nickel-based powder metallurgy superalloy under elevated temperature

Study on the creep property by small beam specimen with fixed constraint

Experimental Investigation On Stochastic Crack Growth Model Of Gh4133b At Fatigue-Creep