Abstract:The influence of orientation on the creep rupture properties of a single crystal superalloy DD6 under multiaxial stress was carried out at 980 degrees C and 400 MPa. A circumferential V-type notched specimen had been designed to investigate the effect of multiaxial stress state on the creep behavior. It was found that the creep lifetimes of the [111] oriented notched specimen were slightly longer than that of the [011] orientation and 1.36 times longer than that of the [001] orientation. The computational results showed that the strain and damage distribution revealed fourfold symmetry, double symmetry and threefold symmetry for [001], [011] and [111] orientation respectively, which was confirmed by experimental observation. At high temperature the creep anisotropy in three different orientations exhibited mainly in primary and secondary creep stages. Through the study of notched specimens by SEM, the morphology evolution of gamma'-phase proved that the directional coarsening was strongly dependent on the local effective stress and the direction of the local max principal stress with respect to loading axis. Fracture morphology displayed uneven cleavage configuration with multi-level feature, and the cleavage planes parallels (001), (011) and (111) crystal plane for [001], [011] and [111] orientation, respectively. The cleavage plane, which is attributed to the cracks propagated along the interfaces of gamma/gamma'phases, displayed square-like, rhombus-like and hexagon-like feature for [001], [011] and [111] orientation, respectively. Due to the higher density in dislocations of {111} planes, it is more easily as the secondary crack when the crack reach the {111} planes, which is thought to be the main reason of forming different feature on primary cleavage plane. (C) 2016 Elsevier B.V. All rights reserved.

Influence of Notch on Creep Properties of GH3536 Nickel-Based Superalloy

Creep Damage Mechanism and Γ′-Phase Morphology of a V-notched Round Bar in Ni-based Single Crystal Superalloys

The Effect of Multi-inclined Holes on the Creep Properties of Nickel-Based Superalloy

Creep Properties of V-notched Round Rod Specimen under Triaxial Stress State

Development of Tensile and Creep Properties for FGH95 Little Notched Specimens at High Temperature

Notch effect and its mechanism during creep rupture of nickel-base single crystal superalloys

V-Notched Bar Creep Life Prediction: GH3536 Ni-Based Superalloy Under Multiaxial Stress State

Prediction of Creep Rupture Life of A V-Notched Bar in Dd6 Ni-Based Single Crystal Superalloy

Anisotropic Creep Damage and Fracture Mechanism of Nickel-Base Single Crystal Superalloy under Multiaxial Stress

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Investigation on Microstructure Evolution and Fracture Morphology of Single Crystal Nickel-Base Superalloys under Creep-Fatigue Interaction Loading

Creep Residual Life Prediction of a Nickel-Based Single Crystal Superalloy Based on Microstructure Evolution

Study on Creep Behaviors of GH3230 Superalloy With Side Notches or a Center Inclined Hole at 900°C and 1000°C

Microstructure Evolution Mechanisms in Nickel-Based Single Crystal Superalloys under Multiaxial Stress State

Low Cycle Creep-Fatigue Behavior of Nickel Base Superalloy GH536

NUMERICAL STUDY OF THE NOTCH EFFECT ON THE CREEP BEHAVIOR AND LIFE OF NICKEL-BASE SINGLE CRYSTAL SUPERALLOYS

Creep Rupture of Smoothed and Notched Dd6 Single Crystal Superalloy Specimens Subjected to High Temperature Hot Corrosion

Creep-fatigue Behavior of Nickel-Based Single Crystal Superalloy with Different Orientations: Experimental Characterization and Multi-Scale Simulation

Thickness Influence on the Creep Response of DD6 Ni-Based Single-Crystal Superalloy

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Effect of Annealing Treatment on Microstructure Evolution and Creep Behavior of a Multiphase Ni3Al-based Superalloy