Abstract:The elucidation of creep-fatigue damage mechanisms is still controversial for high-temperature structures after surface strengthening treatments, which serves as a critical foundation for the development of an accurate life prediction method. In this work, a numerical procedure is constructed for the prediction of creep-fatigue life improvement, where a dual-scale modeling approach is proposed to integrate important strengthening factors and microstructure features. The macro-scale finite element (FE) simulation aims to investigate the cyclic deformation behavior in a notched structure by using a viscoplastic constitutive model. The initial stress field is predetermined based on the experimental residual stress. The micro-scale FE analysis is employed to investigate the local damage evolution occurring at the notched root by combining size-dependent crystal plasticity with grain boundary cavity model. The cycle-by-cycle deformation histories are extracted from the macro-scale FE model and subsequently are utilized as boundary conditions in the micro-scale FE one. From the experimental perspective, the submerged micro-abrasive waterjet peening (SMA-WJP) process is carried out for creep-fatigue life improvement of the notched structure. Results shows that the notched structure treated by the SMA-WJP process forms an obvious plastic layer with the depth of 20 μm and residual stress with the maximum value of -926 MPa. The predicted numbers of cycles to crack initiation agree with the creep-fatigue experimental ones before and after SMA-WJP. In detail, the surface residual stress and plastic layer are unable to suppress the cavity nucleation on the grain boundaries of internal material. As a consequence, the creep-fatigue life improvement is diminished as the hold time increases, which can be accurately predicted by the developed numerical procedure.

V-Notched Bar Creep Life Prediction: GH3536 Ni-Based Superalloy Under Multiaxial Stress State

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Numerical simulation of creep notched bar of P91 steel

Stress Rupture Life Prediction Method for Notched Specimens Based on Minimum Average Von Mises Equivalent Stress

Study on Creep Behaviors of GH3230 Superalloy With Side Notches or a Center Inclined Hole at 900°C and 1000°C

Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650°C

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Creep-fatigue life prediction of notched structure after an advanced surface strengthening treatment in a nickel-based superalloy at 650°C

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Creep-fatigue life prediction in nickel-based superalloy GH4169 based on microstructural damage quantification with the help of electron backscatter diffraction

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method

The influence of γ′ morphology and size on stress rupture properties in Ni-base superalloy IN738LC

Creep rupture mechanism and microstructure evolution around film-cooling holes in nickel-based single crystal superalloy specimen

A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy

Creep behaviors and deformation mechanisms at intermediate temperatures in a novel γ‐γ' nickel‐based superalloy

Experimental investigation on creep strengthening phenomenon of a Ni-based single crystal superalloy under cyclic loading and unloading conditions

Creep life prediction of Ni‐based single‐crystal superalloy plate with film‐cooling holes using a modified critical distance method based on the improved weight function

Creep-fatigue rupture mechanism and microstructure evolution around film-cooling holes in nickel-based DS superalloy specimen

Study on creep characteristics and the isochronous stress–strain curve of Ni-Cr-Mo superalloy

The Effects of Inhomogeneous Microstructure and Loading Waveform on Creep-Fatigue Behaviour in a Forged and Precipitation Hardened Nickel-Based Superalloy