Abstract:Cylindrical microlens arrays (CMLAs) play a key role in many optoelectronic devices, and 100% fill-factor CMLAs also have the advantage of improving the signal-to-noise ratio and avoiding stray-light effects. However, the existing preparation technologies are complicated and costly, which are not suitable for mass production. Herein, we propose a simple, efficient, and low-cost manufacturing method for CMLAs with a high fill-factor via the electric-field-driven (EFD) microscale 3D printing of polydimethylsiloxane (PDMS). By adjusting the printing parameters, the profile and the fill-factor of the CMLAs can be controlled to improve their optical performance. The optical performance test results show that the printed PDMS CMLAs have good image-projecting and light-diffraction properties. Using the two printing modes of this EFD microscale 3D-printing technology, a cylindrical dual-microlens array with a double-focusing function is simply prepared. At the same time, we print a series of specially shaped microlenses, proving the flexible manufacturing capabilities of this technology. The results show that the prepared CMLAs have good morphology and optical properties. The proposed method may provide a viable route for manufacturing large-area CMLAs with 100% fill-factor in a very simple, efficient, and low-cost manner.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c08652.EFD microscale 3D-printing principle and two printing modes; microfluidic chip structure and mixing effect verification; comparison of nanoimprint results of different hybrid methods of PDMS; effect of the nozzle size on the printing line width and height; effect of the printing height on the printing line width and height; schematic diagram of the imaging experiment of the PDMS CMLA; schematic diagram of the imaging experiment of the PDMS CMLA; and comparison of CMLAs manufactured by various technologies (PDF)High-speed photography of the micro-extrusion printing mode (MP4)Printing CMLAs with 100% fill-factor using the micro-extrusion mode (MP4)High-speed photography of the continuous cone jet printing mode (MP4)Printing CMLAs with 100% fill-factor using a continuous cone jet mode (MP4)Printing cylindrical dual-MLAs via two printing modes of EFD microscale 3D printing (MP4)Printing phoenix-shaped specially shaped microlenses by the continuous cone jet mode (MP4)Printing phoenix-shaped specially shaped microlenses by the microextrusion mode (MP4)This article has not yet been cited by other publications.

Fabrication of Shape Controllable Micro-Lens Arrays by Drop on Demand Printing on the Glass Micro-Holes Arrays

Fabrication of Microglass Lens Mould by Using Ultraprecision Microgrinding Process

In Situ Fabrication of a Tunable Microlens.

Micro Aspheric Glass Lens Molding Process

Mask-Moving-Lithography-Based High-Precision Surface Fabrication Method for Microlens Arrays

Concave Microlens Array Mold Fabrication in Photoresist Using UV Proximity Printing

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

DA Henderson, Smallpox Eradicator.

Fabrication Method of Low F-Number Microlens Arrays by Using Surface Coating and Epoxy Dispensing Technology

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Preparation of high precision aspherical lenses based on micro stereolithography technology

Formation of micro protrusive lens arrays atop poly(methyl methacrylate).

A Novel Fabricating Method of Micro Lens-on-Lens Arrays with Two Focal Lengths

Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching

The lens was fabricated by fluidic shaping

Low‐Cost Volumetric 3D Printing of High‐Precision Miniature Lenses in Seconds (Advanced Optical Materials 17/2022)

Fabricating SU-8 Photoresist Microstructures with Controlled Convexity–Concavity and Curvature through Thermally Manipulating Capillary Action in Poly(dimethylsiloxane) Microholes

Optical Nanofabrication of Concave Microlens Arrays

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

A&E nurses plan to sue over post-traumatic stress.

3D Printing of a PDMS Cylindrical Microlens Array with 100% Fill-Factor