Abstract:Modification schematic diagram of CF/PA6 composite. The mechanical properties of carbon fiber (CF) reinforced thermoplastic polymer composites are primarily governed by the interphase between CFs and matrix. However, the inherent inertness of CF surfaces combined with the high viscosity and processing temperatures of thermoplastic resin often result in relatively weak interfacial bonding. This study aims to enhance the interfacial adhesion of carbon fiber reinforced polyamide 6 composites to improve their mechanical properties. CFs were de‐sized and oxidized, followed by re‐sizing with silanized carbon nanotubes. Fracture morphology and composition analysis of the fibers were conducted, and the fibers were subsequently incorporated into composites for mechanical testing. Results revealed a 20.0% increase in tensile strength, a 25.11% increase in flexural strength, and a 24.88% increase in interlaminar shear strength for the resized‐carbon fiber reinforced polyamide 6 composites compared to the pristine‐carbon fiber reinforced polyamide composites. The cross‐sectional morphology of the modified composites exhibited a zig‐zag fracture pattern. Dynamic mechanical analysis indicated that the modified fibers required higher activation energy for the free movement of the polyamide 6 molecular chain. These findings suggest that surface treatment enhances the interfacial adhesive between CF and resin, thereby significantly improving the mechanical properties of carbon fiber reinforced polyamide 6 composites. Highlights An efficient and reliable carbon fiber surface treatment method is proposed. Surface modification improves surface chemical activity of carbon fibers. Composites show substantial improvements in mechanical properties. Interfacial performance enhancement mechanism of composite was revealed.

Effects of Functionalization MWCNTs on the Mechanical and Electrical Properties of Nylon-6 Composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion

Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes

The effect of electrophoretic deposition p‐aminobenzenesulfonamide grafted CNT on mechanical properties of carbon fiber filled polyamide 6 composite

Melt rheological properties of nylon 6/multi-walled carbon nanotube composites

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

In Situ Polymerization Approach to Multiwalled Carbon Nanotubes Reinforced Polyundecanoylamide Composites

Effects of Chemical Functionalization of MWCNTs on the Structural and Physical Properties of Elastomeric Copolyetherester-based Composite Fibers

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

Crystallization and Rheological Behaviors of Amino-Functionalized Multiwalled Carbon Nanotubes Filled Polyamide 6 Composites

Synergistic effect of Mn 2+ with unzipped carbon nanotubes on enhancement of mechanical properties of polyamide 66

Nucleating Effect of Surface Modified MWNTs on Crystallization of MWNTs/PA6 Composites

Dispersion Stability of Functionalized MWCNT in the Epoxy–amine System and Its Effects on Mechanical and Interfacial Properties of Carbon Fiber Composites

Effects of carbon nanotube length on interfacial properties of carbon fiber reinforced thermoplastic composites

Influence of Carbon Nanotubes with Different Functional Groups on the Morphology and Properties of Ppo/Pa6 Blends

Effect of Multi-Walled Carbon Nanotubes on the Properties of Polyoxymethylene

A study of mechanical behavior and morphology of carbon nanotube reinforced UHMWPE/Nylon 6 hybrid polymer nanocomposite fiber

Improvement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy Matrix

Radiation-induced grafting of multi-walled carbon nanotubes in glycidyl methacrylate–maleic acid binary aqueous solution