Abstract:Modification schematic diagram of CF/PA6 composite. The mechanical properties of carbon fiber (CF) reinforced thermoplastic polymer composites are primarily governed by the interphase between CFs and matrix. However, the inherent inertness of CF surfaces combined with the high viscosity and processing temperatures of thermoplastic resin often result in relatively weak interfacial bonding. This study aims to enhance the interfacial adhesion of carbon fiber reinforced polyamide 6 composites to improve their mechanical properties. CFs were de‐sized and oxidized, followed by re‐sizing with silanized carbon nanotubes. Fracture morphology and composition analysis of the fibers were conducted, and the fibers were subsequently incorporated into composites for mechanical testing. Results revealed a 20.0% increase in tensile strength, a 25.11% increase in flexural strength, and a 24.88% increase in interlaminar shear strength for the resized‐carbon fiber reinforced polyamide 6 composites compared to the pristine‐carbon fiber reinforced polyamide composites. The cross‐sectional morphology of the modified composites exhibited a zig‐zag fracture pattern. Dynamic mechanical analysis indicated that the modified fibers required higher activation energy for the free movement of the polyamide 6 molecular chain. These findings suggest that surface treatment enhances the interfacial adhesive between CF and resin, thereby significantly improving the mechanical properties of carbon fiber reinforced polyamide 6 composites. Highlights An efficient and reliable carbon fiber surface treatment method is proposed. Surface modification improves surface chemical activity of carbon fibers. Composites show substantial improvements in mechanical properties. Interfacial performance enhancement mechanism of composite was revealed.

The effect of electrophoretic deposition p‐aminobenzenesulfonamide grafted CNT on mechanical properties of carbon fiber filled polyamide 6 composite

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Effect of Dendrimer‐like PAMAM Grafted Attapulgite on the Microstructure and Morphology of Nylon‐6

Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6

Reinforcement of polyamide 6 with carbon fiber surface modified by a polar cross-linked network interfacial phase

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Study on the Construction of Dopamine/Poly(ethyleneimine)/Aminoated Carbon Nanotube Multilayer Films on Aramid Fiber Surfaces to Improve the Mechanical Properties of Aramid Fibers/Epoxy Composites

Polydopamine particle in-situ assisted carbon fiber/CNTs brush with dynamic imine bonds for enhancing the interface properties of its polyamide 6 composites

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Effect of filler functionalization on thermo-mechanical properties of polyamide-12/carbon nanofibers composites: a study of filler–matrix molecular interactions

Improving the Interfacial Adhesion of Long Carbon Fiber-Reinforced Polyamide 6 Composites by Electrochemical Oxidation and Polyethylenimine-Carboxymethyl Cellulose Grafting

Interfacial enhancement of carbon fiber composites by poly(amido amine) functionalization

Mechanical and Tribological Properties of Carbon Fiber Reinforced POM Composite Filled With Maleamidic Acid Treated Carbon Nanotube

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

Construction of polydopamine and carbon nanotube on carbon fiber surfaces to improve the mechanical properties of CF/PLA composite

Interfacial adhesion between carbon fibers and nylon 6: Effect of fiber surface chemistry and grafting of nano-SiO2

Effects of the Electrophoretic Deposition of CNTs on the Mechanical Properties of Ti/CFRP Composite Laminates

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion