Abstract:Cold drawn high carbon pearlitic steel wires have the highest strength of all massproduced steel materials and are widely used in industry for a variety of applications,including cables for suspension bridges,steel cords for automobile tires and springs.At present the maximum tensile strength of high-carbon steel wires has already reached a value of 5.7 GPa.The properties of steel wires,including strength,fatigue properties and torsinal properties,are deeply affected by microstructure and ferritic micro-orientation and texture in the deformed pearlite.In this study,the evolutions of microstructure and ferritic micro-orientation and texture were investigated in a pearlitic steel wire during cold drawing using electron channel contrast(ECC) and electron backscatter diffraction(EBSD) techniques.The results show that there exist shear-bands(S-bands) in the deformed pearlite microstructure. Their appearance is related to the angle between cementite plates and the drawing axis: the larger the angle is,the more S bands appear in the structure.The pearlite structure turns to the drawing direction and the angle between S band and drawing axis decreases with the increase of strain. The S-bands in the deformed pearlite colony induce the rapid change of local orientation of ferrite, and make the pearlite colony subdivide into several areas by high angle boundaries of ferrite.The strong〈110〉fibre texture of ferrite parallel to the drawing direction forms with the increase of strain,but the intensity of〈110〉fibre texture of ferrite is inhomogeneous from the centre to surface in longitudinal section with the strongest in the centre and the weakest near the surface.

Mathematical Model of Relation Between Microstructure and the Yield Strength of High Carbon Steel Wire Rods

Mathematical Model for Relationship between Structure and Yield Strength of High Carbon Steel Wire

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Static model and cross section characteristic analysis of steel strand

Relationship between microstructure and yield strength for plain carbon steel with ultrafine or fine (ferrite+cementite) structure

Microstructural Evolution, Strengthening Mechanisms and Strength Structure Relationship in Cold-Drawn Pearlitic Steel Wire

Theoretical model of yield strength for eutectic colony microstructure materials

Application of Statistical Representation of Microstructure during Simulation of Ferritic-Pearlitic Steel Wire Drawing

A Simple Model for the Strength and Elongation of Ultra-Fine Grained Low Carbon Steels

The Comprehensive Effect of Controlled Cooling and Si/Mn Elements on the Structure-Property Relationship of a Novel Wire Rod

Characterization of the Microstructure in Drawn Pearlitic Steel Wires

A mathematical model for the prediction of mechanical properties on ASTM A510/A853 cold-drawn hypoeutectoid steel wire after batch annealing

Prediction on the Mechanical and Forming Behaviors of Ferrite-Martensite Dual Phase Steels Based on a Flow Model

Microstructure Analysis and Yield Strength Simulation in High Co–Ni Secondary Hardening Steel

Modeling of Structural Hardening in Oxide Dispersion-Strengthened (ODS) Ferritic Alloys

Effect of Microstructure and Microtexture on the Mechanical Properties of Small-Strain Cold-Drawn Pearlite Steel Wires

Quantitative Description of Temperature- and Strain Rate-Dependence of Yield Strength of Structural Steels

Prediction on the Mechanical and Forming Behavior of DP590 Steel Based on a Flow Model

EVOLUTIONS OF MICROSTRUCTURE AND FERRITIC MICRO--ORIENTATION AND TEXTURE IN A PEARLITIC STEEL WIRE DURING COLD DRAWING

Formation of needle like proeutectiod ferrite and its influence on medium carbon steel wire properties