Abstract:During the cold drawing process, pearlite lamellae turn to the drawing direction to form ferrite fiber texture; the cementite lamellae are divided into a multilayer structure, and the dissolution of cementite lamellae in some regions results in the lattice expansion of ferrite phase and the occurrence of neck‐down regions in the cementite lamellae. The microstructure, texture, and dislocation configuration of cold‐drawn pearlitic steel wires were investigated by scanning electron microscopy (SEM), electron backscattering diffraction (EBSD), and transmission electron microscopy (TEM). In addition, Fe/Fe3C interface structure at the atomic level was clearly observed and analyzed by high‐resolution TEM (HRTEM), and the microscopic deformation mechanism of cementite lamellae at different drawing strains is revealed. The results show that pearlite lamellae turn to the drawing direction to form ferrite fiber texture, and the cementite and ferrite lamellae are simultaneously thinned with the increase of drawing strain. During the cold drawing process, shear‐bands(S‐bands) are formed in the cementite lamellae; the dislocation of ferrite transits from single slip to multi‐slip stage, and the dislocation density increases. After drawing, the lattice structures of cementite and ferrite phases show the evolution from single‐crystal to polycrystal, and the cementite lamellae are divided into a multilayer structure: central relative large‐size cementite crystal and outside relative small‐size cementite crystal layer; the dissolution of cementite lamellae in some regions results in the lattice expansion of ferrite phase and the occurrence of neck‐down regions in the cementite lamellae.

Microstructural Evolution, Strengthening Mechanisms and Strength Structure Relationship in Cold-Drawn Pearlitic Steel Wire

Structure and strength of sub-100 nm lamellar structures in cold-drawn pearlitic steel wire

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Characterization of the Microstructure in Drawn Pearlitic Steel Wires

Dislocation-Based Plasticity and Strengthening Mechanisms in Sub 20 Nm Lamellar Structures in Pearlitic Steel Wire

EVOLUTIONS OF MICROSTRUCTURE AND FERRITIC MICRO--ORIENTATION AND TEXTURE IN A PEARLITIC STEEL WIRE DURING COLD DRAWING

Hierarchical Structures in Cold-Drawn Pearlitic Steel Wire

Effect of Microstructure and Microtexture on the Mechanical Properties of Small-Strain Cold-Drawn Pearlite Steel Wires

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

High deformation and delamination mechanisms explained through mesoscale and nanoscale phenomena in pearlitic steel wires

Surface Stress Effects On The Yield Strength In Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

Cementite Deformation and Dissolution in a Cold-Drawn Pearlitic Steel Wire

Microstructural Dependence of Anisotropic Fracture Mechanisms in Cold-Drawn Pearlitic Steels

Experimental Analysis of Wire Drawing Influence on Microstructure, Texture, and Mechanical Properties of High‐Carbon Steel for Prestressing Strand

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Evolution of Microstructure and Fe/Fe3C Interface Structure in Cold‐Drawn Pearlitic Steel Wires

Microstructure and Properties of Pearlitic Steel during Cold Wire Drawing: A Residual Stress Perspective*

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

Evolution of Cementite Morphology in Pearlitic Steel Wire During Wet Wire Drawing

Microstructure Evolution and Mechanical Properties of a Wire-Arc Additive Manufactured Austenitic Stainless Steel: Effect of Processing Parameter

Microstructure evolution of high-strength and ultra-high-conductivity microfilament wire prepared by continuous deformation of single-crystal copper