Abstract:High Co-Ni secondary hardening steels have received great attention for a long time. In several decades, many previous studies were made to improve their strength, toughness, corrosion resistance ability and even stress corrosion sensibility. Although many new kinds of high Co- Ni secondary hardening steels were developed by researchers, the mechanisms of strength and toughness were still a problem, which would inhibit the further development of high Co-Ni secondary hardening steels. In this work, both microstructure and mechanical properties of high Co-Ni secondary hardening steels were analyzed by simulation and experiment. The strengthening and toughening mechanism was explained, which included the transformation induced plasticity (TRIP) effect of austenite layer in nanometer size and the precipitation of M2C in nanometer size. According to the previous studies about AerMet100 steel, the design standard for high Co-Ni secondary hardening steels was established, which included the mole volume change for austenite, the stability of austenite, the austenite thickness, the austenite equilibrium content, the M2C size, the M2C equilibrium content and cost control. Based on this design standard, the ageing process for a new high Co-Ni secondary hardening steel was analyzed. By controlling the ageing process as 515 degrees C for 10 h, based on the design standard, M2C with the size of 1-5 nm and austenite layers with the thickness of 10-20 nm was formed in new high Co-Ni secondary hardening steels. The equilibrium content of M2C and austenite layers were controlled as 19.5% and 3.8%, respectively. The simulation results were basically consistent with the microstructure observation results. The high Co-Ni secondary hardening steel treated by the designed heat treatment process has considerable strength (2021 MPa) and toughness (115 MPa center dot m(1/2)). Both simulation and experimental results showed that this design standard of ageing process for high Co-Ni secondary hardening steels can help to obtain steels with high strength and toughness.

Microstructure Analysis and Yield Strength Simulation in High Co–Ni Secondary Hardening Steel

Design Standard and Analysis of Ageing Process in High Co-Ni Secondary Hardening Steel

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Carbide Precipitation and Element Distribution in High Co–Ni Secondary Hardening Steel

Effect of ageing temperature on the microstructural evolution and mechanical properties in M 2 C and NiAl co-precipitation secondary hardening ultrahigh-strength steel

Microstructure evolution and mechanical behavior of Fe-Mn-Al-C low-density steel upon aging

Design of a 2.7 GPa ultra-high-strength high Co–Ni secondary hardening steel by two-step nano-size precipitation tailoring

Analysis of Fracture Toughness in High Co–Ni Secondary Hardening Steel Using FEM

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments

Structures of M 2 C carbides and its influence on strengthening in AerMet100 steel at the typical tempering temperature 482 °C

Multi-scale Simulation of Hydrogen Influenced Critical Stress Intensity in High Co–Ni Secondary Hardening Steel

The Evolution of a Microstructure during Tempering and Its Influence on the Mechanical Properties of AerMet 100 Steel

Investigation of Cu-enriched precipitates in thermally aged Fe-Cu and Fe-Cu-Ni model alloys

Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys

Effects of Ni on Austenite Stability and Fracture Toughness in High Co-Ni Secondary Hardening Steel

Microstructure, Tensile Properties, and Fracture Toughness of an In Situ Rolling Hybrid with Wire Arc Additive Manufacturing AerMet100 Steel

Microstructure evolution and aging hardening in a Cu-25Ni-25Mn alloy

Effect of microstructural evolution on high-temperature strength of 9Cr-3W-3Co martensitic heat resistant steel under different aging conditions

Effect of Solution and Aging Temperatures on Microstructure and Mechanical Properties of 10Cr13Co13Mo5Ni3W1VE(S280) Steel

Simultaneous improvement of strength and toughness via two-stage aging for a secondary hardening steel