Abstract:High Co-Ni secondary hardening steels have received great attention for a long time. In several decades, many previous studies were made to improve their strength, toughness, corrosion resistance ability and even stress corrosion sensibility. Although many new kinds of high Co- Ni secondary hardening steels were developed by researchers, the mechanisms of strength and toughness were still a problem, which would inhibit the further development of high Co-Ni secondary hardening steels. In this work, both microstructure and mechanical properties of high Co-Ni secondary hardening steels were analyzed by simulation and experiment. The strengthening and toughening mechanism was explained, which included the transformation induced plasticity (TRIP) effect of austenite layer in nanometer size and the precipitation of M2C in nanometer size. According to the previous studies about AerMet100 steel, the design standard for high Co-Ni secondary hardening steels was established, which included the mole volume change for austenite, the stability of austenite, the austenite thickness, the austenite equilibrium content, the M2C size, the M2C equilibrium content and cost control. Based on this design standard, the ageing process for a new high Co-Ni secondary hardening steel was analyzed. By controlling the ageing process as 515 degrees C for 10 h, based on the design standard, M2C with the size of 1-5 nm and austenite layers with the thickness of 10-20 nm was formed in new high Co-Ni secondary hardening steels. The equilibrium content of M2C and austenite layers were controlled as 19.5% and 3.8%, respectively. The simulation results were basically consistent with the microstructure observation results. The high Co-Ni secondary hardening steel treated by the designed heat treatment process has considerable strength (2021 MPa) and toughness (115 MPa center dot m(1/2)). Both simulation and experimental results showed that this design standard of ageing process for high Co-Ni secondary hardening steels can help to obtain steels with high strength and toughness.

Analysis of Fracture Toughness in High Co–Ni Secondary Hardening Steel Using FEM

Multi-scale Simulation of Hydrogen Influenced Critical Stress Intensity in High Co–Ni Secondary Hardening Steel

Effects of Ni on Austenite Stability and Fracture Toughness in High Co-Ni Secondary Hardening Steel

Design Standard and Analysis of Ageing Process in High Co-Ni Secondary Hardening Steel

Microstructure Analysis and Yield Strength Simulation in High Co–Ni Secondary Hardening Steel

Carbide Precipitation and Element Distribution in High Co–Ni Secondary Hardening Steel

Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure

Investigation of the Fracture Behavior of High-Strength Structural Steel and Welds Based on Micromechanical Models

Comparative Study of High-Cycle Fatigue and Failure Mechanisms in Ultrahigh-Strength CrNiMoWMnV Low-Alloy Steels

The Role of Cu and Al Addition on the Microstructure and Fracture Characteristics in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels with Superior Toughness

High-Cycle Fatigue Fracture Behavior of Ultrahigh Strength Steels

Quantitative Analysis of Microstructure and Impact Toughness in the Simulated Coarse-Grained Heat-Affected Zone of Cu-bearing Steels

FEM ANALYSIS ON FRACTURE TOUGHNESS OF Q460C HIGH-STRENGTH STEEL

Shear Fracture of Advanced High Strength Steels

Analysis and simulation on fracture of structural steel at elevated temperatures based on extended finite element method

Simulation Analysis on Fracture Modes of Ultra-High Strength Steel Spot-Welded Lap-Shear Joints

Stress Intensity Factor of High Strength Steel

Microstructure and Notched Fracture Resistance of Low Alloy 0.56% C Steels after Simulated Induction Hardening

Mechanisms of strength and hardening in austenitic stainless 310S steel: Nanoindentation experiments and multiscale modeling

Fracture Prediction of Powder Metallurgical Fe–Cu–C Steel at Elevated Temperatures Via Finite Element-Aided Hot Tensile Tests

Quantitative Analysis of the Micromechanical Behavior and Work Hardening in Fe-0.1C-10Mn Steel Via In-Situ High-Energy X-ray Diffraction