Abstract:The Fe–C–Mn–Si alloys are promising advanced high strength steels (AHSSs) with their performances greatly influenced by iron carbides precipitated in quenching and partitioning process. To date, the structural characteristics and physicochemical properties of iron carbides, particularly the non-stoichiometric carbides like η and ε phases, still remain elusive. In the present work, the atomic structures, phase stability, mechanical properties, and temperature-dependent thermodynamic properties of potential iron carbides precipitated in Fe–C–Mn–Si alloys, including η -Fe 2 C-Pnnm, ε -Fe 2 C-P6 3 /mmc, ε-Fe n C-P6 3 22, θ-Fe 3 C-Pnma and χ-Fe 5 C 2 -C2/c, are investigated by performing the first-principles calculations based on density functional theory. It turns out that the hexagonal Fe 2.4 C and Fe 3 C carbides have the same space group of P6 3 22, with their local atomic structure being featured by the C-centered CFe 6 principal cluster with coordination number of six. Thus, these two phases are regarded as the same iron carbide. The orthorhombic η -Fe 2 C and θ-Fe 3 C phases are more stable than the hexagonal ε -Fe 2 C and ε -Fe n C (n = 2.4, 3) carbides, resulting in a potential phase transition from ε to η and/or θ. Analysis on stabilities indicate that the C atoms in iron carbides prefer to occupy the ordered octahedral and prismatic interstices. In comparison with the ε- Fe n C (n = 2.4, 3) carbides, which is stiffer at low temperatures, the precipitation of the θ-Fe 3 C and η -Fe 2 C carbides can benefit to strengthen the Fe–C–Mn–Si alloys at elevated temperatures. The present work provides an important insight for understanding the atomic structures and thermodynamic properties of iron carbides along with their contribution to the mechanical performances of AHSSs.

Structures of M 2 C carbides and its influence on strengthening in AerMet100 steel at the typical tempering temperature 482 °C

The Evolution of a Microstructure during Tempering and Its Influence on the Mechanical Properties of AerMet 100 Steel

Mechanical Properties and Thermal Stability of Carbide Dispersion Strengthened CLF-1 Steel

Evolution of Microstructures and Mechanical Properties with Tempering Temperature in a Novel Synergistic Precipitation Strengthening Ultra-High Strength Steel

Evolution and Coarsening of Carbides in 2.25Cr-Lmo Steel Weld Metal During High Temperature Tempering

Tempering influence on microstructural evolution and mechanical properties in a core of CSS-42L bearing steel

Effect of Tempering Conditions on Secondary Hardening of Carbides and Retained Austenite in Spray-Formed M42 High-Speed Steel

Microstructure Analysis and Yield Strength Simulation in High Co–Ni Secondary Hardening Steel

Effect of Cu addition on the precipitation behavior of M2C carbides in maraging steel

The Properties of 1500 Mpa Grade Alloy Steel with Carbide Free Bainite/Martensite Mixed Microstructures

Effect of Tempering Temperature and Carbide Free Bainite on the Mechanical Characteristics of a High Strength Low Alloy Steel

Carbide Precipitation and Element Distribution in High Co–Ni Secondary Hardening Steel

Strengthening of Low Carbon Steel by Nano-sized Vanadium Carbide in Ferrite and Tempered Martensite

Carbide Precipitation during Processing of Two Low-Alloyed Martensitic Tool Steels with 0.11 and 0.17 V/Mo Ratios Studied by Neutron Scattering, Electron Microscopy and Atom Probe

Thermodynamic Analysis of the Formation Mechanism of Metastable Carbides during Tempering of Fe–C Martensite

Effect of ageing temperature on the microstructural evolution and mechanical properties in M 2 C and NiAl co-precipitation secondary hardening ultrahigh-strength steel

325 Air-cooled Carbide Free Bainite-Martensitic Steel and Its Properties

Tailoring the metastable reversed austenite from metastable Mn-rich carbides

Effect of carbon alloying on microstructure and mechanical behaviors of Fe35Ni35Cr20Mn10 multi-component alloy

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Tailoring the stability of iron carbides to enhance the mechanical performances of Fe–C–Mn–Si alloys