Abstract:This work explores the carbide evolution behavior and mechanical property evolution mechanisms of intercritical-annealed 3Mn steel during the tempering process by comparing different tempering times (5/10/20 min). The results showed that the elongation of 3Mn steel increased from 19.5% to 26.5% after tempering while maintaining a tensile strength above 1250 MPa. It is also found that carbide precipitation during tempering is first followed by dissolution. The mechanical properties exhibited abnormal degradation at tempering for 10 min, with a tensile strength of 1265 MPa and a total elongation of 16.0%. However, the optimal mechanical properties were achieved at tempering for 20 min, with a tensile strength of 1286 MPa and a total elongation of 26.5%. During the initial stage of tempering, a transformation occurs from M 3 C to stable M 7 C 3 , with the presence of numerous dislocations and grain boundaries promoting the precipitation and growth of abundant carbides. This leads to a reduction in the C and Mn content in the matrix, consequently decreasing the austenite content and stability, resulting in the transformation of austenite to the BCC phase during tempering instead of cooling. The decreased austenite content and stability lead to reduced ductility. Subsequently, dislocations were annihilated during tempering, suppressing carbide precipitation, and the over-precipitated carbides dissolved under thermodynamic driving force, leading to an increase in C and Mn content in the remaining austenite, thus enhancing its stability. The precipitation and dissolution of carbides during tempering, along with the partitioning of elements between carbides and austenite, strengthen austenite stability and improve mechanical properties.

Effect of Tempering Temperature and Carbide Free Bainite on the Mechanical Characteristics of a High Strength Low Alloy Steel

325 Air-cooled Carbide Free Bainite-Martensitic Steel and Its Properties

The Properties of 1500 Mpa Grade Alloy Steel with Carbide Free Bainite/Martensite Mixed Microstructures

Tempering Effects on the Stability of Retained Austenite and Mechanical Properties in a Medium Manganese Steel

Synergetic Effects of Ferrite Content and Tempering Temperature on Mechanical Properties of a 960 MPa Grade HSLA Steel

Evolution of Microstructures and Mechanical Properties with Tempering Temperature in a Novel Synergistic Precipitation Strengthening Ultra-High Strength Steel

Effect of Tempering Temperature on Carbide Precipitation and Mechanical Properties of Marine Atmospheric Corrosion Resistant Steel

Microstructure Evolution and Mechanical Properties during Long-term Tempering of a Low Carbon Martensitic Stainless Bearing Steel

Development of Air‐Cooled Carbide‐Free Bainite/Martensite Multiphase Steel: Transformation Kinetics, Microstructure, and Mechanical Properties

Tempering influence on microstructural evolution and mechanical properties in a core of CSS-42L bearing steel

Regulation Law of Tempering Cooling Rate on Toughness of Medium-Carbon Medium-Alloy Steel

Carbide precipitation and hydrogen embrittlement susceptibility of a 960 MPa grade ultra-high strength steel

Effect of precipitation-induced element partitioning during tempering on mechanical properties of hot-rolled 3Mn steel after intercritical annealing

Structure–mechanical Property Relationship in a Low Carbon Nb–Cu Microalloyed Steel Processed Through a Three-Step Heat Treatment: the Effect of Tempering Process

Effect of austempering temperature on microstructure and cyclic deformation behaviour of multiphase low-carbon steel

Competitive role of film-like austenite and transition carbides on hydrogen embrittlement resistance and impact toughness in bainite-containing quenched and partitioned steel

Study on Diversified Carbide Precipitation in High‐Strength Low‐Alloy Steel during Tempering

Effect of Tempering on the Bainitic Microstructure Evolution Correlated with the Hardness in a Low-Alloy Medium-Carbon Steel

Effect of Temperature on Microstructure and Mechanical Properties of Fe-9Ni-2Cu Steel during the Tempering Process

Effects of Tempering Temperature on the Microstructure, Strength, and Toughness of Medium-Carbon Ti–Mo-Bearing Martensitic Steel

Effect of Tempering Conditions on Secondary Hardening of Carbides and Retained Austenite in Spray-Formed M42 High-Speed Steel