Abstract:To illustrate the microstructural factors of grain refinement for enhancing mechanical properties, the fine−/ultrafine-grained TWIP steels with a product of strength and elongation of ~71 GPa·% were first prepared by combining rolling and stress relief annealing. Subsequently, the evolution of dislocations, stacking faults, and associated substructures of the fine−/ultrafine-grained TWIP steels was analysed by using in-situ EBSD tensile tests and TEM characterisation of the interrupted strain experiments. The results reveal that the excellent mechanical properties of the TWIP steels are attributed to dislocations and associated dislocation cells, dislocation walls, dislocation tangles, stacking faults and associated Lomer-Cottrell locks (LCs), nano-twins, primary and secondary twins and their interactions during plastic deformation. The density of geometrically necessary dislocations (GNDs) was evaluated based on the modified Ashby's model and compared with experimental results, indicating that grain size heterogeneity can promote the accumulation of GNDs, which facilitates the generation of subgrains and new boundaries to reduce the mean free path (MFP) of dislocations, thus enhancing strain hardening. Meanwhile, the interaction of lamellar primary and secondary twins in fine grains and the generation of stacking faults and nano-twins in ultrafine grains at higher strains can further promote strain hardening to elevate strength. Furthermore, the effects of grain orientation and grain size on the activation and evolution of dislocations and twins were elucidated. In ultrafine grains, twinning is strongly inhibited due to the elevated critical shear stress for twinning, resulting in more stacking faults and nano-twins, but fewer dislocation cells. The present work contributes to an in-depth understanding of the mechanical properties of fine−/ultrafine-grained materials to exploit their potential for industrial applications.

A Simple Model for the Strength and Elongation of Ultra-Fine Grained Low Carbon Steels

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Theoretical Insight of Strengthening and Hardening Behavior in Ultrafine-Grained Metals under High Pressure

Quantitative model for grain boundary effects on strength-electrical conductivity relation

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Effect of grain ultra-refinement on microstructure, tensile property, and corrosion behavior of low alloy steel

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

Yielding Behavior and Strengthening Mechanisms of a High Strength Ultrafine‐Grained Cr–Mn–Ni–N Stainless Steel

Delving into the intrinsic co-relation between microstructure and mechanical behaviour of fine−/ultrafine-grained TWIP steels via TEM and in-situ EBSD observation

Achieving Excellent Strength–Ductility Synergy by Tailoring the Grain Size Distribution in a Metastable Austenitic Stainless Steel

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Unusual grain-size effects on tensile deformation behavior of twinning-induced plasticity steel with low Mn content

Grain refinement strengthening mechanism of an austenitic stainless steel: critically analyze the impacts of grain interior and grain boundary

Improving the Tensile Ductility and Uniform Elongation of High-Strength Ultrafine-Grained Al Alloys by Lowering the Grain Boundary Misorientation Angle

Grain-size effect on the deformation of Mg–3Al–3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling

Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries.

A Grain Level Model for Deformation and Failure of Ultrafine-Grained Tungsten

Ultrafine Structure and High Strength in Cold-Rolled Martensite

Prediction of grain refinement using multiscale crystal plasticity-integrated dislocation density-based model in multiphase steel alloys