Abstract:The oxidation behavior of Si-containing steels at high temperature has been the subject of numerous investigations. In many cases, the addition of Si to the steel in sufficient amounts to form an external film of SiO2 or other Si-rich oxide on the steel surface has resulted in extremely slow oxidation rates. However, the steel in which Si content is insufficient forms an external scale and an internal scale on the steel surface and a subscale in the steel interior which are less protective.In order to suppress the growth of the scales on the hot slab which causes surface bruise of hot rolled Si-containing steel sheets, many researchers paid attention to the de-scaling characteristics of Si-containing steels. However, the effects of Si content on the oxidation kinetics, scale composition and scale structure, especially three-dimensional scale morphology formed on the Si-containing steels at high temperatures are not necessarily understood adequately. In this study, the high-temperature oxidation behavior and scale morphology of (0, 0.5, 1.5, 3.0 mass%) Si-containing steels exposed to the flowing air and the LNG combustion gas atmosphere at 1373K or 1473K were investigated. The external scale and the internal scale formed on Si-containing steels were composed of the laminated α-Fe2O3 and Fe3O4 and the mixture of FeO and Fe2SiO4, respectively. The subscale may be composed of vitreous SiO2. The kinetics of the external and internal scale formation were followed by parabolic rate laws. The SEM images of the three-dimensional subscale extracted from the oxidized steels by means of an organic solvent system dissolution technique showed that an intergranular oxide formed thin walls along not only grain boundaries but also twin boundaries of the steel matrix and an intragranular oxide formed isolated particles in the steel grains near the internal scale.

Comparative Study of Structure and Pickling Characteristics of Oxide Scale Formed on Strips Produced by TSCR and Conventional Process

Process Optimization of Straightening Scale Breaking and Pickling Process for Residual Oxide Scale on Surface of Hot Rolled Strip Steel

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

Effect of Oxide Scale Microstructure on Atmospheric Corrosion Behavior of Hot Rolled Steel Strip

Influence of Oxide Scales on the Corrosion Behaviors of B510L Hot-Rolled Steel Strips

The Structure Change and Corrosion Protectivity of the Oxide Scale on An SS400 Hot-rolled Steel Plate

Experimental Study on Adhesion of Oxide Scale on Hot-Rolled Steel Strip

Immersion pickling of oxide layer on hot-rolled 2205 duplex stainless steel in sulfuric acid with different additives

Effect of microstructure and microtexture evolution of oxide layer over J82B steel on mechanical descaling properties

Influence of Surface Condition on the Electrochemical Behavior of Alloy Steel in Saturated Ca(OH)2 Solution

Influence of cooling process on oxide scale structure of SPHC hot rolled plate

Comparative Analysis of Chemical and Phase Compositions of Rolling Scale of Metallurgical Enterprises

Microstructural Study and Residual Stress Measurement of a Hot Rolling Work Roll Material During Isothermal Oxidation

Isothermal Structure Transformation and Kinetics Behavior of Oxide Scale on Low Carbon Steel

A Comparison of Texture Development in an Experimental and Industrial Tertiary Oxide Scale in a Hot Strip Mill

High-Temperature Oxidation and Subscale Morphology of Si Containing Steels

Mechanism of Black Strips Generated on Surface of CSP Hot-Rolled Silicon Steel

Reduction of Oxide Scale with Hydrogen

Pickling Behaviour of 2205 Duplex Stainless Steel Hot-Rolled Strips in Sulfuric Acid Electrolytes

Descaling Abilities of Two Low-Alloy High-Strength Steels Under Different Heating Processes

Crystallographic Texture Based Analysis Of Fe3o4/Alpha-Fe2o3 Scale Formed On A Hot-Rolled Microalloyed Steel