Abstract:During the milling of a curved surface, the shape of the curved surface changes continuously along the milling path, and the direction of the angle between the axis of the milling tool and the normal vector of the machined surface also changes. In turn, these changes greatly affect the quality of the machined surface. Therefore, to improve the surface quality of machined workpieces, the milling tool inclination angle should be optimized. In the present study, a three-dimensional model of the milling tool path and the workpiece surface was created. The three-dimensional surface model of the workpiece at each machining moment was iteratively built based on the Z-map method. From the macroscopic perspective, the influences of different milling tool inclination angles on surface roughness were analyzed. The difference in surface roughness generated by different inclination angles under the same feed rate and pitch was obtained. When cutting with the top of the milling tool, the roughness was larger compared to other inclination angles, and there was a roughness deviation of about 8% when other inclination angles were selected. Moreover, from the microscopic perspective, the material removal rate from a single feed cycle and the optimal inclination angle range for milling stability were explored. An optimal inclination range of 15–30% was obtained, considering both the total material removal volume and unit-angle material removal volume. Finally, a spherical machining verification experiment was conducted on an ultra-precision machining tool, and the experimental findings agreed well with the simulation results, demonstrating the reliability of the proposed model. The theoretical model of this study can provide a basis for optimal cutting tool inclination angle selection during complex surface milling.

Research on Calculation Method of the Cutter Setting Angle in Screw Surface Form Milling

Systematic Study of the Prediction Methods for Machined Surface Topography and Form Error During Milling Process with Flat-End Cutter

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

An accurate surface error optimization for five-axis machining of freeform surfaces

Calculation of Cutter-location and Error Analysis in Numerical Control Flank Milling of Twisted Ruled Surface Impeller

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Estmation Formula Deduction of Face Milling Cutter Cut-in Manner

Experimental analysis and modeling of cutting power model

Modeling the Surface Swept by a Milling Cutter by Using the Envelope Theory of Two-parameter Family of Spheres

Influence of Tool Assembly Error on Machined Surface in Peripheral Milling Process

Examination of Surface Milling Performance of Micro-Textured Ball Milling Cutter

The Machining Principle and Modeling of Conical Screw with Continuous Grading Lead

Modeling Swept Envelopes of Rotary Cutting Tools with Application to Five-axis Flank Milling

A Surface Enveloping-Assisted Approach on Cutting Edge Calculation and Machining Process Simulation for Skiving

Geometric characteristics analysis and parametric modeling for screw rotor precision machining

Tool Orientation Optimization of 5-Axis Ball-End Milling Based on an Accurate Cutter/workpiece Engagement Model

Calculation method for instantaneous shear energy efficiency and volume-energy ratio of milling cutter under multiple factors

Third-order Point Contact Approach for Five-Axis Sculptured Surface Machining Using Non-Ball-end Tools(ii): Tool Positioning Strategy

Theoretical Analysis on Generating Mechanism of Machined Surface in Ball-nosed End Milling for Spherical Surface. (2nd Report). the Estimation of Machined Surface Based on Spiral Cutting Edge in Consideration of Frank Interference.

Study on the influence of milling tool inclination angle on surface quality and optimal selection in the ultra-precision diamond milling of curved surfaces