Abstract:For improving energy efficiency of machining process, extensive studies focused on how to establish energy consumption model and optimize cutting parameters. However, the existing methods lack a systematic method to promote the widespread use of energy efficiency methods in industry. This paper proposes a systematic method integrating energy model, experiment design, and multi-objective optimization model. Firstly, the energy model is established considering cutting energy and non-cutting energy. Then, the orthogonal experiment is designed with the three levels of four factors of spindle speed, feed speed, cutting depth, and cutting width in the X and Y cutting directions. The data of energy consumption, surface quality, and machining time are obtained to study the effects of different cutting elements and cutting directions. Meanwhile, the standby, spindle idling, feed, SEC (specific energy consumption), material cutting, and idling feed models of the CNC machine tools are established based on the experimental data. Additionally, five sets of experimental data are tested for verifying the accuracy of the established energy consumption model, which can reach 99.4%. Finally, a multi-objective optimization model for high efficiency and energy saving of processing process is established to optimize the cutting parameters considering energy consumption, processing time, and surface quality simultaneously. Combining the case of milling with constraints including machine tool performance, tool life, processing procedures, and processing requirements, the Pareto solution set is used to solve the Pareto of the target model. Through drawing a three-dimensional needle graph and two-dimensional histogram, the optimal cutting parameter combination for rough machining and semi-finish machining is provided assisting in promoting the application of the sustainable techniques in the industry.

Calculation method for instantaneous shear energy efficiency and volume-energy ratio of milling cutter under multiple factors

The energy method to predict disc cutter wear extent for hard rock TBMs

Experimental analysis and modeling of cutting power model

Energy Modeling for Variable Material Removal Rate Machining Process: an End Face Turning Case

An Investigation into Methods for Predicting Material Removal Energy Consumption in Turning

Evaluation on models of calculating energy consumption in metal cutting processes: a case of external turning process

Energy Criteria for Machining-Induced Residual Stresses in Face Milling and Their Relation with Cutting Power

A new energy consumption model suitable for processing multiple materials in end milling

Energy modeling and a method for reducing energy loss due to cutting load during machining operations

Optimisation of Cutting Parameters for Improving Energy Efficiency in Machining Process

Evaluation of Smaller Milling Cutter Health Based on Volumetric Wear Parameters

Indirect approach for predicting cutting force coefficients and power consumption in milling process

Methodology for Calculating Energy Consumption of a Machining Process

Cutting Energy Consumption Modeling by Considering Tool Wear and Workpiece Material Properties for Multi-Objective Optimization of Machine Tools

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

Research on the excitation characteristics of milling force for a general helix cutter

An Energy Efficiency Tool Path Optimization Method Using a Discrete Energy Consumption Path Model

On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel

Energy consumption investigation of a three-axis machine tool and ball-end milling process

A systematic method of optimization of machining parameters considering energy consumption, machining time, and surface roughness with experimental analysis

A study on energy-saving optimization strategy for the stone processing industry—an improved method for modeling cutting power and energy consumption: A case study of block sawing process