Abstract:<p>A circumferential crack in the fusion line is a major threat to the structural integrity of the pipeline girth weld because it may possibly lead to fracture failure when subjected to large plastic deformations. For the newly constructed X80 pipeline with an outside diameter (OD) of 1422 mm in China, the complicated configuration of welded joints and the outer diameter are outside the range of the general fracture assessment standards, such as BS 7910. Furthermore, during the pipe manufacture process, pipeline designers merely specify the minimum yield strength limit according to the pipe steel grade. This results in a wide variation range in the choice of yield strength values of the base metal. This also leads to a serious problem in the fracture assessment of pipe girth weld because the weld strength is commonly considered to be either evenly matched or overmatched. The foregoing factors make it difficult to perform an accurate fracture assessment using conventional standards. This study therefore aims to investigate the fracture behavior of 1422-mm OD pipelines with a double-V groove weld and circumferential crack in the fusion line. The specific effect of material mismatch and the realistic operational parameters that influence the fracture capacity of the pipe are examined via a series of numerical investigations. First, a rigorous three-dimensional finite element model to simulate the pipe girth weld is established by utilizing the ABAQUS finite element code package. The weld, which has a canoe-shaped surface crack in the fusion line between the heat-affected zone and root welding metal, is subjected to biaxial loading conditions. The keyhole method is adopted to simulate the crack front as well as the crack tip to eliminate the stress singularity effect during deformation. A refined mesh strategy is introduced to ensure the accurate simulation of the stress and strain fields in the vicinity of the crack tip. Based on the numerical model, the J-integral fracture parameter, which is clearly defined based on a strict mechanical theory, is chosen to characterize the effect of strength matching ratio, internal pressure, and yield to tensile strength ratio on the crack driving force. A new strain-based J-integral prediction formula is proposed based on numerical results.</p>

Study on FCAW Semi-Automatic Welding Procedure of Girth Weld Joint of Line Pipes

On the evolution of root weld microstructure and properties during automatic girth welding of high strength pipeline steel

Investigation on the Fatigue Crack Propagation Behavior of L360MS Pipeline Steel Welded Joints with Inconel 625 Weld Metal

Investigation of the tensile strain response of the girth weld of high-strength steel pipeline

Fracture driving forces of cracked girth welds with mechanical heterogeneity for X80 pipes

Characterization of Mechanical Properties and Residual Stress in API 5L X80 Steel Welded Joints

Simultaneously enhancing strength and fracture toughness via tailoring the microstructure in X80 girth weld metal

Fracture response of 1422-mm diameter pipe with double-V groove weld joints and circumferential crack in fusion line

Corrosion fatigue behavior of X65 pipeline steel welded joints prepared by CMT/GMAW backing process

Effect of through-thickness microstructure inhomogeneity on mechanical properties and strain hardening behavior in heavy-wall X70 pipeline steels

Research of Micro-Alloyed Microstructure and Composition in X80 Pipeline Steel for High Heat Input Welding

Study of Bauschinger effect of acicular ferrite and polygonal ferrite through ex-situ interrupted bending tests in API X80 linepipe steels

Study on Microstructure and Properties of Welded Joint of L360QS/N08825 Bimetallic Composite Pipe

Electrical, microstructural, and mechanical behavior of HSLA X70 pipeline welded by GMAW and FCAW processes

Effect of Microstructure on Mechanical Properties of X65MS Welded Pipe Joint

Full-scale experimental investigation of the fracture behaviours of welding joints of APL X80 wide plate based on DIC technology

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline

Changes in microstructure and properties of weld heat-affected zone of high-strength low-alloy steel

Fatigue properties of ferrite/bainite dual-phase X80 pipeline steel welded joints

Research on the fatigue properties of sub‐heat‐affected zones in X80 pipe

Inhomogeneous Strain Behaviors of the High Strength Pipeline Girth Weld under Longitudinal Loading