Abstract:For greater productivity, oil and gas are increasingly being transported at higher pressures through steel pipelines, which has necessitated the development of thick-gauge high-strength–high-toughness line pipe steels. In this work, the microstructural evolution of a 22-mm-thick Nb and Ti microalloyed API Grade X70 line pipe steel subjected to thermomechanical processing is investigated. The microstructure of the steel sample was analyzed using advanced characterization techniques to glean insight into microstructure and texture. The surface of the plate consisted of a relatively higher fraction of polygonal ferrite, whereas the plate interior possessed a higher fraction of non-polygonal ferritic structure. The grain size was found to increase from the surface to the center of the plate. The presence of a higher fraction of secondary phases, such as degenerated pearlite (DP) and martensite austenite (MA) constituents, was observed toward the core of the plate. The major texture components ({001} , {113} , and {332} ) were found to be present through the thickness. However, their intensity increased toward the core of the plate. Higher intensity of {113} toward the core of the plate may cause a higher degree of anisotropy of mechanical properties than the surface of the plate. The detrimental impact of {001} texture on fracture may get counterbalanced by the beneficial impact of {113} texture on toughness. A high fraction of composite coarse precipitates ((Nb,Ti)CN type) in the outer part of the plate may contribute to an increase in grain refinement in the final microstructure during the processing of the plate. In contrast, a high fraction of fine precipitates (<20 nm) observed in the ferrite matrix at the core may contribute to a higher ductile-brittle transition temperature. An in-depth understanding of microstructure will allow its correlation with the mechanical properties needed for thick gauge pipelines with higher transmission rates.

Research of Micro-Alloyed Microstructure and Composition in X80 Pipeline Steel for High Heat Input Welding

Changes in microstructure and properties of weld heat-affected zone of high-strength low-alloy steel

Microstructure and mechanical properties of X90 high strength pipeline steel

Effect of heat treatment on the microstructure and mechanical properties of a low-carbon X80 pipeline steel

Studying the Microstructural Evolution in a Hot-Rolled Thick Gauge Microalloyed Line Pipe Steel

The Influence of Heat Treatment on Microstructure Properties of X80 Pipeline Steel

Simultaneously enhancing strength and fracture toughness via tailoring the microstructure in X80 girth weld metal

Effect of root welding heat input on microstructure evolution and fracture mechanism in intercritically reheat-coarse grained heat-affected zone of X80 pipeline steel

Experimental Study on the Hot Deformation Characterization of Low-Carbon Nb-V-Ti Microalloyed Steel

Quantitative Correlation between Thermal Cycling and the Microstructures of X100 Pipeline Steel Laser-Welded Joints

Effect of Nb Content and Second Heat Cycle Peak Temperatures on Toughness of X80 Pipeline Steel

Controlled Rolling of X80 Pipeline Steel in the Austenite Recrystallization Temperature Region and Its Effect on the Microstructure and Mechanical properties

Effect of Microstructure on Mechanical Properties of X65MS Welded Pipe Joint

Microstructural Features of Low-Alloy Pipeline Steels that Determine Impact Strength of Welded Joint Heat-Affected Zone

Microstructure Characterization and Strengthening Mechanism Analysis of X100 Pipeline Steel

The Microstructure and Mechanical Property of X70, X80 and X100 Grade Pipeline Steel

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Microstructure and properties of X100 large-deformability pipeline steel based on heating on-line partitioning

On the evolution of root weld microstructure and properties during automatic girth welding of high strength pipeline steel

Effect of through-thickness microstructure inhomogeneity on mechanical properties and strain hardening behavior in heavy-wall X70 pipeline steels

Control of Weld HAZ Properties in Modern High Strength Pipeline Steels