Abstract:Multipass welding of high strength steels used for fabrication and joining of transmission pipelines presents a number of metallurgical challenges. A key concern is both the strength and toughness of the heat affected zone (HAZ) adjacent to both seam and girth welds. In this work, a systematic study has been conducted on regions of the heat affected zone in the base metal where the first welding pass produces a thermal excursion which results in a coarse-grained heat affected zone (CGHAZ). The subsequent weld pass involves intercritical annealing of this region, i.e. a microstructure associated with intercritically reheated coarse grain heat affected zone (ICCGHAZ). The small ICCGHAZ region is often identified as being particularly susceptible to crack initiation. This work was undertaken to understand microstructure development in this zone and how the ICCGHAZ may affect the overall performance of the HAZ. Gleeble thermomechanical simulations have been conducted to produce bulk samples representative of different welding scenarios. Charpy impact tests and tensile tests have been performed over a range of temperatures. It was found that when a continuous necklace of martensite-austenite islands form on the prior austenite grain boundaries (i.e. for a M/A fraction of ≈10%), the Charpy impact toughness energy is dramatically decreased and the ductile brittle transition temperature is significantly raised. Detailed studies on the secondary cracks have been conducted to examine the fracture mechanisms in the different microstructures. The results show that the lower bainite microstructures obtained after the 1st thermal treatment, representative of CGHAZ have excellent impact properties. The impact toughness of the microstructures typical of ICCGHAZ is strongly dependent on the composition as well as morphology and spatial distribution of the resulting martensite-austenite (M/A) islands transformed from inter-critically formed austenite. This zone can play a significant role in fracture initiation and thus needs to be considered in alloy and welding process designs.

Electrical, microstructural, and mechanical behavior of HSLA X70 pipeline welded by GMAW and FCAW processes

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Hydrogen-assisted cracking in GMA welding of high-strength structural steels using the modified spray arc process

Microstructural analysis and mechanical behavior of the HAZ in an API 5L X70 steel welded by GMAW process

Quantitative Correlation between Thermal Cycling and the Microstructures of X100 Pipeline Steel Laser-Welded Joints

Effect and Optimization of Welding Parameters and Flux Baking on Weld Bead Properties and Tensile Strength in Submerged Arc Welding of HSLA 100 Steel

Performance optimization and investigation of metal-cored filler wires for high-strength steel during gas metal arc welding

Investigations on Mechanical Strength and Microstructure of Multi-Pass Welded S690QL HSLA Steel Using MAG and FCAW

Effect of previous heating treatments conditions and gas metal arc welding (GMAW) on mechanical and microstructural properties of HSLA steel DOMEX 460MC

Experimental and numerical investigation on optimization of welding parameters and prediction of temperature distribution during shielded metal arc welding of ultra high hard armor steel joints

Corrosion fatigue behavior of X65 pipeline steel welded joints prepared by CMT/GMAW backing process

Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process

Research on the hydrogen assisted fatigue damage in X80 pipeline steel welded joint

An approach to tunable advanced high-strength steel fabrication through multi-wire arc additive manufacturing (M-WAAM)

Failure behavior of resistance spot welded advanced high strength steel: The role of surface condition and initial microstructure

Continuous Drive Friction Welding of AISI 8630 Low-Alloy Steel: Experimental Investigations on Microstructure Evolution and Mechanical Properties

On the Heat-Affected Zone Role for Mechanical Properties of Structural-Steel MIG and CMT–MIG Weldments

A comprehensive study of ultrasonic-assisted gas metal arc welding of high-strength steel

Prediction of HAZ Microstructure and Hardness for Q960E Joints Welded by Triple-Wire GMAW Based on Thermal and Numerical Simulation

Microstructures from wire-fed laser welding of high strength steel grades

Mechanical Behaviour of Intercritically Reheated Coarse-Grained Heat Affected Zone in High Strength Line Pipe Steels