Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The present research aims to investigate and analyse the metallurgical features, including macrostructure, microstructure, scanning electron microscopy with energy-dispersive X-ray spectroscopy, and electron backscatter diffraction. In addition, the mechanical properties of the arc welding specimens, encompassing hardness, tensile properties, and impact toughness at room temperature, were determined. The specimens were joined utilising various welding techniques, including gas tungsten arc welding, gas metal arc welding, shielded metal arc welding, and flux-cored arc welding. According to macrography, the weldments have no porosity, inclusions, or penetration. This confirms the optimal weldment fabrication process parameters. An optical microstructure analysis was conducted on various zones of the weldments. The weld fusion zone's microstructure reveals delta (δ) ferrite within the austenite matrix. A two-phase microstructure of bainite and untempered martensite is observed in the heat-affected zone. Scanning electron microscopy images at higher magnification reveal austenite and partially δ-ferrite phases. Energy-dispersive X-ray spectroscopy analysis showed higher chromium, nickel, manganese, silicon, and molybdenum concentrations on the grain boundary than in the matrix. According to electron backscatter diffraction, the average weld zone grain sizes for gas tungsten arc welding, gas metal arc welding, shielded metal arc welding, and flux-cored arc welding are 21.4, 35.8, 25.8, and 34.3 μm, respectively. In the heat-affected zone, the grain size decreased significantly. The welding region has lower mechanical properties than the heat-affected zone. All specimens produced using different welding processes had no cracking in the weld metal, including the fusion zone and border.

Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process

Effect of the welding technique on mechanical properties and metallurgical characteristics of the naval grade high strength low alloy steel joints produced by SMAW and GMAW

Continuous Drive Friction Welding of AISI 8630 Low-Alloy Steel: Experimental Investigations on Microstructure Evolution and Mechanical Properties

Microstructure and mechanical properties of HSLA thick plates welded by novel double-sided gas metal arc welding

Influence of Post-Weld Heat Treatment on Microstructural and Mechanical Properties of Dual-Phase Steel Gas Metal Arc-Welded Joints

A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding

Experimental study of shielding gas concentration on mechanical properties of stainless steel alloy parts using wire and arc additive manufacturing

Mechanical and microstructural characterization of AISI SAE 4130 steel welded joints made by robotic gas metal arc welding process: influence of electrode work angle in 'T' welded joints

Arc-welded armour steel: A tailored and comparative study of its microstructure and mechanical properties

Evaluation on Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel Joints with Oscillating Arc Narrow Gap GMA Welding

Studies on Microstructure and Mechanical Properties of Weldments Produced in 12 mm Thick Naval Grade High Strength Low Alloy Steel for Sub-Zero Application by Single and Double Pass Hybrid Laser Arc Welding

Effect of Gas Metal Arc and Cold Metal Transfer Arc Welding Processes on Microstructure and Mechanical Properties of AA8011-H18 Alloy Joints

Effect of Pre- and Post Weld Heat Treatment on Microstructure Development and Mechanical Properties of 0.3%C-CrMoV (ESR) High-Strength Low-Alloy Steel

Influence of Different Process Parameters on Microstructural and Mechanical Properties of Cold Metal Transfer Joining of DP 600 Steel and Al 5052 Alloy

Gas Tungsten arc welding of Ti-6Al-4V sheet for pressure vessels used in aerospace application: A detailed characterization of weldment

Microstructural, Mechanical, and Thermal Analysis of SS316L Weldment for Marine Engineering Application

Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel

Welding of S1100 Ultra high‐Strength Steel Plates with Matching Metal‐Cored Filler Wire: Microstructure, Residual Stresses, and Mechanical Properties

Advanced High-Strength Steels for Automotive Applications: Arc and Laser Welding Process, Properties, and Challenges

Docol 1300M Micro-Jet-Cooled Weld in Microstructural and Mechanical Approaches concerning Applications at Cyclic Loading

Effect of previous heating treatments conditions and gas metal arc welding (GMAW) on mechanical and microstructural properties of HSLA steel DOMEX 460MC