Abstract:The hydrogen production by ethanol steam reforming over Ni–Co–Al mixed oxides derived from layered double hydroxides is evaluated in this work. The catalysts were prepared via coprecipitation and characterized through N2 adsorption and desorption measurements, X-ray diffraction (XRD), temperature programmed reduction (TPR), CO2 desorption and oxidation, and scanning electron microscopy. The catalyst activity was evaluated in a fixed bed reactor between 400 and 600 °C, using ethanol and water in a 1:3 ratio, with online analysis of products by gas chromatography. Increasing the amount of Co increased surface area. XRD analysis revealed a mixture of Ni–Al and Co-Al oxides after calcination. The TPR profiles revealed that an increase in Co content leads to a more stable mixed oxide phase. The activity results showed that H2 selectivity increases with reaction temperature and Co content in the catalyst. The high selectivity for H2 is attributed to methane decomposition being favored. Hence the larger production of carbon is promoted by the excess of Co in the catalyst with the highest amount of Co. The decomposition of ethanol producing CO, CH4, and H2 is favored at higher temperatures. The selectivity for H2 remained above 90% in long term tests at 600 °C. XRD analysis after reactions showed that the presence of Co decreases the sintering of catalysts. The compromise between resistance to sintering and carbon deposition points to a medium amount of Co in the catalyst. All catalysts showed metallic phases after the reaction, demonstrating that the reduction step is not necessary for this reaction.

Hydrogen production from bio-oil model compounds dry (CO 2 ) reforming over Ni/Al 2 O 3 catalyst

Hydrogen Production Via Catalytic Reforming of the Bio-Oil Model Compounds: Acetic Acid, Phenol and Hydroxyacetone

Enhanced Hydrogen Production from Steam Reforming of Vegetable Oil over Bimodal ZrO2-SiO2 Supported Ni Catalyst

Effective Hydrogen Production from Partial Oxidation of Propane over Composite Ni/Al2O3-SiC Catalyst

Hydrogen-rich syngas production via steam reforming of acetic acid as bio-oil model compound: Effect of CaO addition to NiAl 2 O 4 catalyst

Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

Hydrogen production by CO2 reforming of CH4 in coke oven gas over Ni–Co/MgAl2O4 catalysts

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Hydrogen production by ethanol steam reforming over Ni–Co–Al mixed oxides derived from LDH

Effect of Coal Ash on the Steam Reforming of Simulated Bio-oil for Hydrogen Production over Ni/γ-Al2O3

Hydrogen production from acetic acid decomposition as bio-oil model molecule over supported metal catalysts

Research of the combined reforming of bio‐oil model compound for hydrogen production

Catalytic steam reforming of bio-oil model compounds for hydrogen production over coal ash supported Ni catalyst

Steam Reforming of Model Bio-Oil Aqueous Fraction Using Ni-(Cu, Co, Cr)/SBA-15 Catalysts

Catalytic Steam Reforming of Bio-Oil-Derived Acetic Acid over CeO 2 -ZnO Supported Ni Nanoparticle Catalysts

Statistical optimization of hydrogen production from bio-methanol steam reforming over Ni-Cu/Al2O3 catalysts

Catalytic Reforming of Acetic Acid As a Model Compound of Bio‐oil for Hydrogen Production over Ni‐CeO2‐MgO/olivine Catalysts

Hydrogen production by aqueous phase reforming of methanol over stable C-modified NiMgAl hydrotalcite catalyst

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Renewable hydrogen production from steam reforming of glycerol by Ni–Cu–Al, Ni–Cu–Mg, Ni–Mg catalysts