Abstract:Liquid pollutants and coke formation can cause many problems in steam reforming of bio-oil for hydrogen production. From an environmental and economic point of view, an operation of liquid condensate recycling aiming at eliminating secondary pollution as well as carbon deposition was applied in this work. Under the optimal reaction conditions, m-cresol (a heavy organic compound present in bio-oil) was steam-reformed on a highly efficient commercial Ni-based catalyst for 6 h time-on-stream. Gas product distribution, liquid pollutant formation, and carbon deposition behavior were investigated, respectively. On the basis of one-time liquid condensate recycling, a green and efficient steam-reforming process can be achieved. Under different reaction conditions, the possibility of achieving this green process was evaluated. The results indicated that under a much higher temperature (900 degrees C), m-cresol becomes easier to steam reform but it is still impossible to achieve a green process just by a single steam reforming. Under a low temperature (800 degrees C), low steam/carbon ratio (2.5), or high weight hourly space velocity of bio-oil (1.0 h(-1)), it is difficult to eliminate the liquid pollutants completely by one-time liquid condensate recycling. However, for every single test, the operation of liquid condensate recycling can make a contribution to the increase of the hydrogen yield and the reduction of secondary pollution and coke formation. It provides an alternative route for steam reforming of bio-oil, especially for some heavy components in bio-oil.

Research of the combined reforming of bio‐oil model compound for hydrogen production

Comparative study on the catalytic steam reforming of biomass pyrolysis oil and its derivatives for hydrogen production

Hydrogen Production Via Catalytic Steam Reforming of Bio-Oil Model Compound in A Two-Stage Reaction System

Mechanism of hydrogen production by the catalytic steam reforming of bio-oil

Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

Hydrogen production from steam reforming of bio-oil model compound and byproducts elimination

Catalysts for Steam Reforming of Bio-oil: A Review

Sustainable hydrogen production from steam reforming of bio-oil model compound based on carbon deposition/elimination

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Bio-Oil

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

Hydrogen production from steam reforming of m-Cresol, a model compound derived from bio-oil: Green process evaluation based on liquid condensate recycling

Carbon deposition behavior in steam reforming of bio-oil model compound for hydrogen production

Steam Reforming of Bio‐Oil for Hydrogen Production: Effect of Ni‐Co Bimetallic Catalysts

Hydrogen Production by Catalytic Steam Reforming of Heavy Components in Bio-Oil in Fluidized Bed Reactor

Hydrogen Production from Steam Reforming of Bio-Oil with C12A7-K2O Catalyst

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Biomass Fast Pyrolysis Oil

STEAM REFORMING BIO-OIL TO PRODUCE HYDROGEN IN A FLUIDIZED BED REACTOR

Catalyst Deactivation and Regeneration During CO2 Reforming of Bio-Oil

Steam Reforming of Bio-Oil from Rice Husks Fast Pyrolysis for Hydrogen Production.

Steam Reforming of Model Bio-Oil Aqueous Fraction Using Ni-(Cu, Co, Cr)/SBA-15 Catalysts

Production of hydrogen from catalytic steam reforming of bio-oil using C12A7-O−-based catalysts